where to put the crossover?

[eXphoid]

Agh the beauty of the search tool. just what I was after.

i'm trying to somehow hide it inside the door but the windows are quite annoying.
need to put them somewhere else i guess but i hate all the cable work

 

[Philthy]

Agh the beauty of the search tool. just what I was after.

i'm trying to somehow hide it inside the door but the windows are quite annoying.
need to put them somewhere else i guess but i hate all the cable work

You can (apparently) hide them on the inside of the door trim itself. You will see on the back of the trim there is a bit of room where the arm rest is (behind the sound proofing crap of course). I've never done it myself but it seems to be the done thing

 

[VZ-Rob]

...... I' ve got my crossovers for my rear splits in the boot, i taped them ( yes tape again!!) .....-

I use Scotch 33 Biseal. :bow: A self amalgamating tape instead of soldering
it fuses to itself and is waterproof it is impossible to come loose ever
1 roll will last a lifetime of car audio installs :thumbsup:

 

[eXphoid]

You can (apparently) hide them on the inside of the door trim itself. You will see on the back of the trim there is a bit of room where the arm rest is (behind the sound proofing crap of course). I've never done it myself but it seems to be the done thing

thanks.. i did that today. didn't need to mount it either because the sound proofing was really sticky, stuck right back on tightly gripping the xover - doesn't budge

 

[Summer-Sickness]

cable tied mine in the top of the footwells, theres plenty of room up there lol

 

[StoneX]

Mine are in the boot

My old ones used to be behindin the side panels of the dash.

 

[ephect]

wow havent seen this one in a while

i did end up installing them, my biggest issue was getting the wires thru the rubber gromets, which i ended up doin when i had a day off, and i mounted the crossovers on top of the footwell covers. sounds awesome with splits.