NTJosh
New Member
- Joined
- Apr 16, 2020
- Messages
- 16
- Reaction score
- 0
- Points
- 1
- Age
- 51
- Location
- Perth
- Members Ride
- 09 SV6 LLT
Lad’s,
Ive got a 2009 SIDI engined SV6 that I’m having a couple of issues with, first being the HVAC system.
Problem started with only blowing hot air out the top vent to the windscreen, I spent a bit of time searching on here and google and have tried the demister reset trick with no change.
I’ve gained access to the HVAC actuator of the drivers side along with access to the three on the passengers side. When I try to change vents over via control panel (Which is an Aerpro double din unit) I don’t get any movement at any of the actuators, the same goes when I do the demister reset/learn trick..nothing at all.
I believe the drivers side actuator maybe dicky as I can turn it freely by hand when it hooked up to the actuator and flap...could this be screwing the whole lot up or should the others still be working?
Is there a way of powering up the actuators once removed to check for operation?
My next step was to get a second hand HVAC module from a wrecker and try that, failing that has anyone had issues with the Aerpro control units?
My second issue is the airbag light, battery went flat in the car and it’s been on since then..can a flat battery bring up a airbag fault light?
got the dash in a kagillion pieces, want to get the bastard sorted and back together, have some timing chains coming from Revhigh so that’s next job.
cheers guys
Josh
Ive got a 2009 SIDI engined SV6 that I’m having a couple of issues with, first being the HVAC system.
Problem started with only blowing hot air out the top vent to the windscreen, I spent a bit of time searching on here and google and have tried the demister reset trick with no change.
I’ve gained access to the HVAC actuator of the drivers side along with access to the three on the passengers side. When I try to change vents over via control panel (Which is an Aerpro double din unit) I don’t get any movement at any of the actuators, the same goes when I do the demister reset/learn trick..nothing at all.
I believe the drivers side actuator maybe dicky as I can turn it freely by hand when it hooked up to the actuator and flap...could this be screwing the whole lot up or should the others still be working?
Is there a way of powering up the actuators once removed to check for operation?
My next step was to get a second hand HVAC module from a wrecker and try that, failing that has anyone had issues with the Aerpro control units?
My second issue is the airbag light, battery went flat in the car and it’s been on since then..can a flat battery bring up a airbag fault light?
got the dash in a kagillion pieces, want to get the bastard sorted and back together, have some timing chains coming from Revhigh so that’s next job.
cheers guys
Josh