ULTREX
New Member
Thanks Andy for the update.
The dip stick tube needs to be inserted/positioned when the extractor is loose. Then tighten it up.
Yep on a statesman the hangers on the rear mufflers have been moved about 20mm from the the Ute position so we suggest the easiest way is to remove a prong from each muffler and bolt it up.
O2 wiring can be unclipped further up the engine bay and run more directly If required.
Whilst we could make statesman mufflers with the prongs moved 20mm, it would increase costs substantially, when it's easier and better value to cut off one prong and reweld if you feel the need.
Glad you are happy and thanks for sharing in what is an excellent value system.
Rob
The dip stick tube needs to be inserted/positioned when the extractor is loose. Then tighten it up.
Yep on a statesman the hangers on the rear mufflers have been moved about 20mm from the the Ute position so we suggest the easiest way is to remove a prong from each muffler and bolt it up.
O2 wiring can be unclipped further up the engine bay and run more directly If required.
Whilst we could make statesman mufflers with the prongs moved 20mm, it would increase costs substantially, when it's easier and better value to cut off one prong and reweld if you feel the need.
Glad you are happy and thanks for sharing in what is an excellent value system.
Rob