Dozer31
Active Member
- Joined
- Sep 5, 2021
- Messages
- 168
- Reaction score
- 47
- Points
- 28
- Age
- 53
- Location
- Ringwood North
- Members Ride
- 2007 VE S1 calais
Hi All
Seeking some more advice.
Timing chains just completed again and after start up I have a misfire in bank 2 cylinder 6.
Car starts and runs fine but you can easily tell by engine note and acceleration.
First fault that come up was cam sensor B bank 2 exhast (p0391) which sensor was changed and not seeming to throw this code anymore.
But still has misfire on cylinder 6. (Code p0306) I have swapped coils and it's not that. Also checked spark plugs which are still near new.
Before anyone asks when charging timing chain again All timing makes are spot on with no teeth being out of place.
One other note is when chain works have been done lower manifold was still left in place with fuel line still connected just moved side to side to access rocket covers.
Fault code cleared but still returns with motor still running a little rough.
Anything else I should be checking before it goes to my mechanic?
Seeking some more advice.
Timing chains just completed again and after start up I have a misfire in bank 2 cylinder 6.
Car starts and runs fine but you can easily tell by engine note and acceleration.
First fault that come up was cam sensor B bank 2 exhast (p0391) which sensor was changed and not seeming to throw this code anymore.
But still has misfire on cylinder 6. (Code p0306) I have swapped coils and it's not that. Also checked spark plugs which are still near new.
Before anyone asks when charging timing chain again All timing makes are spot on with no teeth being out of place.
One other note is when chain works have been done lower manifold was still left in place with fuel line still connected just moved side to side to access rocket covers.
Fault code cleared but still returns with motor still running a little rough.
Anything else I should be checking before it goes to my mechanic?