Search results for query: conversion speedo

Hey, I did a conversion on my 2005 Vz Executive from auto to manual and everything works besides my speedo? No auto electric people where i live no how to fix it ( or their too dumb) and i really want my speedo to work, its been about 2 months now with out it :( Does anyone know how to...

i got an injected 5L with a TH700 Box. my speedo isnt working i got the cable to suit but still no response. the speedo does work i know that, but a friend reckons its coz my box is for an electronic speedo like the vs and the cable wont work any idea guys?

hey guys, ive recently done a manual conversion on my vr using a vn motor, vn gearbox, vn engine loom and vn computer, so my vr pretty much thinks its a vn. my speedo is not working and there is no engine light on and no ecu fault codes. i have tried to get the speedo working using all the...

hey, i have finished my manual conversion on my vr v6, it runs really good everrything i fine except for one thing. i cant for the life of me get the speedo working. i have read all the posts about doing the wiring and i have searched like 1000 times to get as much info as possible but it is...

Hi, I want to add an electrical speedo to my Chev Belair. Its very hard to stick to a 50km/h speed limit when the diff and wheels have been changed and the speedo is in mph anyway! I have a VN Speed Sensor which fits in the old powerglide. Can I fit a VN or later speedo without using the ECU? I...

Hey guys I've got a vs series 2 just done a manual conversion and have no speedo drove around without it for a couple of days now I kinda need it I put a t5 manual in it can I get it back with the auto computer or do I NEED the manual computer ??

hey just did my manual conversion and my speedo isnt working. how easy is it to fix? what could b causing it

Hi everyone ive recently done a vn v8 conversion into a v6 vs. they were both manuals. The speedo isnt working now, and was wondering if anyone new how i could get it going ? Cheers

Just put a 5-speed in a VK 3.3EFI replacing the auto, everything ok, except the speedo now shoots up to 180 when I'm doing about 60, goes back to zero when I stop. Tried the speedo gear that came with the gearbox as well as the one out of the old auto and the problem is the same with both. The...

Hey guys Before anyone jumps down my throat i searched before posting this.. Anyways i finished putting my ecotec into my VR its all up and running good but the speedo wasnt working due to not being connected.. So today i went into this thread...

I've done an LS1 and th350 conversion. Its all fitted just doing the final touches. Can anyone point me in the right direction with the speedo cable I'd need. TIA

Hey all, I recently did a dash conversion in my vp to that of a vr...problem is that now my speedo doesn't work along with the fuel and temp gauges. The trip meter and odometer have also failed. I'm using the original wiring loom as well as the original instrument cluster so there...

Done a v8 auto conversion out of a stato into a vs ute v6 / getrag shell Everything works just not the speedo Ute has v6 cluster with not tacho S1 I have put the cluster out of the stato in the ute and tacho works on that but still no speedo

Just finished my rb30 conversion into my vh, what part do i need to buy that will fit into the gearbox to get my speedo to work?

Hey everyone, I've done a manual conversion on my 5 speed Vz Calais to 6 speed manual. I've gotten all the modules out of an SV6 and everything matches up and the car starts. since completing the conversion my digital and analog speedo will not work but all the other gauges work fine. Everything...

Hello folks. Has anyone done a LED conversion on the VS speed alert, and the little Speedo needle light on A police pack Speedo? If so, can I ask for a little direction on finding appropriate LED bulbs to suit? It'd be nice to make the speed alert and Speedo needle brighter on my BT1...

I have just done a v6 conversion to my vh and the speedo setup is a drama....I need to drive a cable for the actual speedo and a sensor for the ecu ....I know there is a sticky thread for this conversion but I was wondering what anyone has done to do this for a auto t 700....I have read a angled...

Hey everyone sorry if this has been asked before but i have a 1992 VP V6 commodore Ute i have manual converted with a bogwarner T5 (factoy) gearbox Since doing the conversion my speedo has stopped working, the harness plug under the car was the same as the plug on the gearbox but doesn't...

hey pplz i have a few qustions to ask about going from auto to manual conversion on a blue 202 i have got all the bolts and mounts getting a new clutch soon iv got the pedals and speedo cable(they gave me another speedo cable also got another tailshaft is there anything im missing

Hey, Ive recently done a T5 conversion and im still using the auto loom and ECU in my VR V6, Is there any way I can get my speedo to work without buying a manual loom and ECU? Ive got reverse lights but no speedo. Need help with this asap please. Any help greatly appreciated. Thanx.

I've just put an Ecotec and Getrag in my VN. All works fine except for the speedo. The T5 has a 3 wire plug and the Getrag has a 2 wire plug. Any suggestions

Need help with wiring up jaycar speed converter off abs or how to fix no speedo issue on t5 manual vt commodore

hey guys does anyone know if i could run a vs speedo sensor straight the the ecu as i may noot be able to use the dash in my conversion cheers will it pose an problems?

Hey im just done a manual conversion with a vn motor an vn loom an computer can any help me figure out my problem iv hooked up the reverse lights starts up fine no dramas. But i cant seem to figure out this speedo replaced speedo sensor on gearbox tryed everything. If anyone has had the same...

Hi ive done a vr auto to manual conversion myself and have a problem with the speedo not working i installed a series 1 motor and 5 speed out of a vn(as the one in it was on its last legs)the only problem ive got is the speedo plugs are diffrent. the vn speedo has 3 wires and my vr wiring...

hey guys i bought a t5 conversion for my ute and i bought a special ecu so that i wouldnt have to change the wiring harness and i bought it and the schematics are telling me to cut this and cut that and join this problem is this is for a 3 wire speedo senser the speedo senser that came with my...

Heya all, I just converted my VR Caprice to a manual. It is absoloutly brilliant now apart from one thing... MY SPEEDO ISNT WORKING (hence why my cruise control, power assisted steering and trip/fuel consumption figures arnt working either!!) Is any1 in the know about how I would wire up the...

Hey all.. Ive almost finished a full 202 engine, diff, struts, disks, exhaust conversion on my starfire 4 vc. Yay :) But im having alittle trouble with the new dash i got 4 the engines kms... All the gauges work exept for the speedo... It kinda works but it just goes from 0 to 160...

Can anyone help with wiring for the speedo when doing auto to T5 conversion? I have read a few different threads but still for the life of me can't figure it out. Have no idea what the D2 wire is and it's just all confusing.

Hey All I have done a manual conversion in my VR clubsport and need to get the speedo working for WOF. Im running a manual pcm with auto loom and have tucked away the auto plugs in engine bay as i don’t want to cut/remove just in case I go back to auto. T5 does not have a plug/loom fitted so...

Need help with speedo correction box I know there is alot of threads covering most aspects of this conversion but im still lost with the wiring side,ive done a auto to manual (t56) conversion on my vr senator and cant figure out how to wire it all up. weve changed to a vs manual ecm which...

the manual conversion on my vs v8 ute is now done. can anyone help me out as how to get the speedo to work as i'm having trouble locating an auto sparky who can do it for me. i have not changed any wiring or the computer. will be getting a reprogrammable computer soon if that helps. thanks.

hey guys, ive recently done a manual conversion on my vr using a vn motor, vn gearbox, vn engine loom and vn computer, so my vr pretty much thinks its a vn. my speedo is not working and there is no engine light on and no ecu fault codes. i have tried to get the speedo working using all the...

who has done a v6 conversion using the t700? i need to know how people hooked up their electronic drive speedo's to read on their mechanical driven dash. im baffled by how to do this, can't find bugger all information and it's standing in my way. any help is appreciated cheers guys

Hi guys, I have a vn series 2 commodore which i converted to manual using a vr gearbox etc, runs fine. However the speedo and reverse lights don't work at all. Anyone had this problem? or do i just need to buy a speedo convertor kit?

Hi Everyone new to the site i hope i started ths thread in the right place i own a 2005 vz v6 holden commodore 1 tonner origanaly it had a 4 speed automatic but i made a custom one off conversion kit and fitted the tremec t56 from a wrecked vz clubsport . when i did the conversion i...

Hey, I have looked through many threads, but i am yet to find what needs to be done, in terms of wiring to complete a manual conversion for a series 2. I am thinking of using a manual ecu and unplugging the wiring loom under the carpet that belongs under the radio area. Then plugging in the...

ITEM: Speedo sensor (Transjuicer) thing that screws into side of gearbox connects to a white plug LOCATION: NSW CONDITION: Used DELIVERY/PICK UP INFORMATION: Newcastle..Will pay postage PAYMENT OPTIONS: Cash, money order , direct deposit CONTACT DETAILS: PM or txt 0434636478...

I have a vr commodore, it was an auto but now has a manual gearbox. It's at the auto electricians and they have been at it all day, they can't figure out how to get the speedo working. Has anyone done this conversion and do they have an answer to this problem??? Because they can't find one.

Hi All, Just a quick couple of questions: -Can I put a 3 window dash, from say a CV8, into a VY SS? I assume the fuel sender might need to be replaced as mine is a S2 car and the dash might be S1. What else needs to be done? What happens if the dash has less KM on it than the car does? -What...