Search results

Do you have any information on the conversion of the m70 to m78 diff centre ?

Mate if you could contact me on 0413817512 that would be appreciated. thanks Adrian

interested to know more about this , if you could contact me that would be great.

has anyone changed the ratios in the diffs ?

went well mate , faulty multimeter the blue sticker pedal is for ls 1 . i have spoken to the guy in Sydney Rhys 0296240200 he has someone that converts the 6 cyl to the V8 for $440. 00 . he will need your Vin to do the right pedal for your vehicle, there not all the same Adrian

i find this very interesting, i have a crewman v6 vz pedal with the same numbers , 9218344 cant read the ast number but assume its 7 white label. So will it work in my Ls1 one tonner ? . i have a ss pedal but dont get any resistance from it . Pt No . 92210500 blue lable

I dont believe i have air bags in my vz seats , only in the steering wheel and dash , will i still need a (module) when swapping seats . Also will VF seats be the same procedure. Cheers

ok thanks , excedy HD clutch ?

wondering if any one knows , i have a problem with locking my ute with the key fob , it wont do it , i have to lock it with the key in the drivers door . i have had the keyfob replaced to no avail . is there something else in under the dash that could be faulty and preventing the fob from...

first time i have owned a hydraulic clutched vehicle , just wondering if the clutch is just about at the end of its life. The clutch engages very close to the end of the pedal stroke. it has done just over 150000 and has always been treated well . if it is worn out does it make sense to just...

Ok an update , have tested the ign barrel/switch all good there , and key fob well it only seams to work on unlock , no noise from under dash when you try to lock. also have no power to the ignition red wire, have given power to the ignition red wire via the battery, gives me dash lights...

ok have a vy v8 one tonne ute, have just installed 2 thermos/oil coolers trans and engine oil cool . i had them wired up to the 2 15 amp ignition fuses located where the fuse box is under bonnet. both with there separate relays and auto circuit braker fuses. ok so heres what happened , drove...

Will a vt vx bonnet fit a vy

hi guys n gals , i would like to know if the ecu holds the amount of klm the vehicle has done , i just bought another vz and think the cluster has been changed . will a good scan tool find this out .

is it possible to change from the leo v6 to the ly7 high out put 190 kw engine . is it an easy swap, or whats involved .

is the factory l 76 in my crewman thunder 58 or 24 tooth reluctor wheel. wanting to fit it to my vz factory ls1 one toner, not sure if i need to swap over all the euc stuff etc. both are manuals

can someone tell me if the early hq to wb 10 bolt is the same as the vh vk vl 10 bolt. i understand some wb had disc rears and the vh and vk, are they the same size length etc . I have a wb disc brake 10 bolt but dont have the calipers, to fit in my HX , so hoping the other later models have...

there is a grommet behind the drivers seat that feeds the tail lights and fuel pump . it comes up to the right of the fuel tank , if you are looking at the car from the rear. so you can run it from the rear up into the underside of the R/H tail light inside the ute body down towards the fuel...

interesting, i have a vy SS one tonne which Holden didn't make. contacted dealer who sold the car said it was just a S v8 one tonner. contacted GMH and they have told me and sent documents proving it is ' in gmh's words a one off " ordered for a customer with all the factory options that the SS...

then u want 308 ratio v6 or 307 ratio v8 that is reasonable accell and great acon

thanks VT2Commie i thought as much

gidday mate waiting to speak with you before a buy ls3 and auto . wanting to put it into my vy one tonne ls1 ute . would like to know about the wiring for the auto so it will work properly . Thanks in advance , looking forward to speaking with you . cheers Adrian my number is 0431630531

hey mate would like to catch up with you to talk to you about the 6 speed conversion , i to am in brisbane . cheers Adrian 0431630531

i know this has been gone over lots , but i cant find the problem i have in the posts. insert the key engine starts fine, but when you turn the engine off and return the key to the insert position , it will not turn forward to re start . you have to remove the key , reinsert it and it will start...

Just trying to find out if the one tonne diff GS9 solid axle is the same diff for the v6 and v8 one tonner. Also 6 speed trans Manual MV5 v6 will it fit the ls1 v8 or is the input shaft different.

am i better off just using the VY wiring harness in the vz

does anyone have access to wiring diagrams for the vz 6 and 8 cyl. i have vy v8 ls1 and want to compare the wiring of the vy v8 to the vz v6 , hoping to splice into the v6 wiring with out pulling out the dash etc to do the conversion

thanks for that dollar dazzler , i will be changing the K frame and struts over to the vz anyway. vc i will be using the fe2 springs from the v8 also

does anyone know if the vy front struts on the 6 cyl and the same as the v8

hi this is what i have. vy ss ute complete car ,body in poor cond vz 6cyl ute in great cond. going to swap everything from the vy to the vz, including suspension . i have a vz ss dash cluster to go in. just wondering if anyone knows of any hidden problems i mite come across. unsure of the...

Hi to all new to this site, have just purchased a 06 vz ute 6cyl . I have noticed when breaking or pressing brake pedal at any speed the steering wheel kind of shutters / jolts . will even do it whist releasing brake at the lights . thinking the release of the brake pads on the discs maybe some...