Search results

Gee its hard to read some of these posts.What do they teach in schools these days.

Try your Transducer It comes out of the side of your box.The wires become hard with age and can break at the transducer.

my vp has a big end bearing knock when it warms up .At idle and just above idle you can hear it...After 600000 plis ks i aint complaining

:) Combination spanners:)

Take out one screw holding the plastic surrounds together remove the top surround them pull the bottom one towards the steeering wheel and down. Use an allen key or bend a nail (3mm max) as the hole for the pin is on top of the lock assy. Turn key to on possy insert and push down the pin and...

My wifes VT ignition barrel failed last night it just loosely turns and nothing happens..How do i get it out? i beleive there is a pin to be pushed in .Where is it and what has to be removed to get to it, Thanks guys

Many thanks for you reply I must try and find a Man VR chip.Then get it modified.Where in Melbourne would you suggest Greenfoam? Thanks again

Mr Greenfoam is there such a chip that will make my VP v6 auto more economical? I do a lot of hwy driving Thanks

My VP wagon has more than 580000 but i cannot prove it due to me putting in a new dash cluster.I threw the old one down the tip and it was showing 585000 then 3 months ago.Major work has been heads and just last week the transmission due to the torque converter failing

Should be good but just check the fitment of them on the front as the bearing dust cover will foul with the centre cap on the wheel (the wheel bolts up but the bearing cap sticks out to far so you cant get the cap on all the way) also check the diameter if the centre of the wheel were it goes...

open the passenger front door and on the pillar you will see a lock this will turn of the imobilizer

They fit with no mods needed :)

Would 15 x 6.5 VY acclaim alloy wheels fit my VP commodore. Thanks (I have searched the forum but can only find threads relating to 17 inch and above vy wheels)

Got them on my VP wagon with LED globes..look ok

Melbourne (Craigieburn)

A thousand thank yous .i didnt do it i will find a vn vp one :bop: Cheers

Did a search and found lots of info ..some say yes some say no ...ill take a chance

Can someone please tell me if a VR V6 level 2 dash board will fit into a VP V6 with no mods and will everything work? Thanks

Before you replaced the filter did you remove the old orange seal from inside the hole.You need a bent scriber or something to pull out the old seal as they are in there fairly tight.The new filter will go in but will foul on the bottom of the trans sump and cause funny things to happen with...