Search results

Have done a reset....and all good so far. But I'm Gunna clean the throttle body erc

Sounds good. Will try step by step... Ecu first.

Hello all My VN has been running all good....till this morning....doesn't like the cold . It tends to stall/hesitate asap you press the throttle a bit. Do we need to install a new air temperature sensor?. Oil I'm using is 20/50. It's got great acceleration,but I've noticed the idle I'd on...

I'll do some hunting around this weekend at these shops to see if they have something and come back. Pity Holden doesn't service the coolant system on this particular series vn

Hi all Thanks for your past help. Have just replaced the surge tank on the commodore as it had a leek on the upper nipple outlet. I wanted to get a new cap and O ring that goes on this type cooling system but have been told by Holden it's an obseleted part( cap,surge cap and the O ring). I then...

My first problem on our prized VN V6. Smelled a pungent hot coolant while driving(in Melbourne it's 37 deg). ...after a long look I noticed there is a rubber pipe behind the alternator on these cars (series one) that carries coolant. It's split and spurting coolant. Easy to get to and replace ...

All done....good ole' WD40.. cleaned andvreplaced. Thanks!!

Ok. I'll do that and let you know how I go. Thanks NOS

.... It's pretty hard inbedded in that grommet....so just pull it out....till it comes out....Does the grommet stay put or is it part of the PVC valve?

Hello I have a vn V6 auto series one with a cause and sports exhaust. Would a mace memcal do wonders for my VN. Does it give better acceleration and power on normal ulp

Hi Thanks for ur help on my last thread. I need to remove the pcv valve on my VN V6 series one commodore to clean it. Taking that upside down "U" hose is easy, but not sure how to take out the actual pcv Valve....is it screw in/out...or do I just pull it out from the rubber grommet on the...

Thanks heaps. I'll start looking for a can and do it. Gonna keep her for a while.

Ladtly...just one more thing...what is the "out"

Oh!. What are those braded pipes going into your air intake system (just before where the pipe is attached to the throttle body?

Great pix!!. So your outlet and inlets are on where the funny U shaped rubber hose is behind alternator(this is where the pcv system is on the VN V6 S1 ?). . You then block off the inlet on the tb and passenger rocker cover and put a breather on the oil filler cap. Am I on the same page as you?

Hi all New here so apologies if I'm posting it right. I got told that by installing a oil catch can is great to stop gunk build up in the TB. So the "out" being from the passenger side rocker cover goes in the "in " part on the can and the "out " outlet on the can goes straight to the TB inlet...