Search results

So the drivers side Hi beam and HI part of the H4 bulb isnt working. the passenger side works fine. Ive swapped bulbs and HI beam bulbs and nothing works. I have noticed my dash lights come on when i step on the break which i know happens when i lights out, but that may be because i have a...

yeah, i can get these from a guy in SA but its from like an old turntable player business so i dunno if they work with modern car amps?? i cheakced connections, it doesnt seem like anythings loose. I stripped back more cover and put more wire in all connections to make it snug, but it still...

My amp doesnt have a SS filter, but it does have a LPF with settings from 40hz to 240hz. Where can i purchases a SS filter from? or do i need a amp with it built in?

At random times when played at full tilt i get a sharp ''pop'' sound from my subwoofer. Its only occasionally and when played at high bass loads, mainly with rock music My setup in Pionner shallow 10inch 300rms sub behind a seat in a ute Pionner 8400m mono block amp Pioneer 3250 dvd...

I have the oppoprtunity to get a seperate equaliser, one of those half-din units. Ive only got a very basic headunit that does bass, mid and treb but thats it. Would it be a good idea to run a seperate equaliser?? im running two subs of one monoblock amp, and a set of front splits of a bridge...

you can get the redback with the muffler, just have to find it. Should be afew shops that give you the option of the rear muffler. ive had a redback kit with the muffler on and without it on. I rather it off, havnt got any drone for some reason (or it might just not bother me) I find it a...

dont know about the cruise, im assuming tho it wont be cheap. As far as i know the units arnt avalible from holden anymore and the only way youll find one is at a junkyard coz i wouldnt think alot of people would take them out. Deffinatly nto cheap and deffinatly not something to tackle alone...

Looking to hook up this amplifier Ryda Car Audio - Pioneer Car Audio GM-D8400M Car Amplifier($329.85) Its 1200w peek, for the moment its running one sub at 300rms Just needing to know what size wiring i need. Ive asked afew people but the more i ask the better. ive been told to get a...

Tom Walkinshaw will be missed as much as the great Peter Brock himself. Those who will miss him know just how much he has given to the australian motorsport community, especially HRT. I had the pleasure of meeting him once, and i have never met a man so knowledgable about both the mechanical and...

In a ute? is 250rms from a single 10 a decent amount of sub? would a 300rms 10 inch be better? Im able to buy an ampliier that will run at 300rms, and its a monoblock, but will i hurt the amp if i run it at full tilt? Also, another stupid question, if my front speakers start to distort...

i bought a kti which came with an AeroPro adapter for my kenwood to VY. Lets just say the thing was wired back to front :) you would have to turn it 180 to get it to line up, but it cant go in because of the clip that holds the plug im place. I didnt have ABS so im not sure what difference...

NSW/. parramatta specifically

can i 2 subs off the first mono block amp i put up?? if theyre both no bigger than 300rms?

what about, Pioneer GM-D7400M Mono Car Amplifier Ryda Car Audio - Pioneer Car Audio GM-D7400M Car Amplifier($278.85) for the amplifier and Pioneer TS-SW3001 12" Shallow Subwoofer - 2Ohm Ryda Car Audio - Pioneer TS-SW3001S2 12" Shallow Subwoofer($289.85) or Pioneer TS-SW2501...

Looking to get these as a crissy present to put into my ute its not my entire setup, just what i can get from the rents My basic list, after doing some reading is this Pioneer GM-D8500M Mono Car Amplifier Ryda Car Audio - Pioneer GM-D8500M Mono Car Amplifier($379.85) Pioneer...

sl are a breeze. The reason you need new shocks is that all shocks are made to travel certain distances (im talking suspension travel) because now you have a lower ride height, the shocks arnt made to soften short, sharp hits. Short shocks are made to do short sharp travels As for springs...

deffinatly dont have abs. known from experiance with idiot sydney drivers!! cheers guys! :D

hey guys, just installed a HID system into my VY. Passenger side works fine, drives side contastantly flicker. Ive swapped ballasts and such around between both headlights and everything works, just have no clue why the drives side wont stop flicking. it happens driving or standing still...

Have a 03 vy ute, runnign SL kigns front with SSL kings rear, and have a camber kit waiting to go in. Id like to run 20's but 19's seem more practical. Just need to know if 19's can fit if im running SSL kings in the rear?? Will they fit if i run just SL kings rear? will that allow 20's

Ok, so i know one will do the whoel ABS thign and one will not, but im looking to put a LSD in my V6 ute and want to know if its ok to use a SS diff which can run abs?? is it a huge deal weather i get a ABS diff or not?? I havnt got ABS, and i dont plan on running it either

Someone told me this was possible. just wanting to know how to hook up a H4 HID kit to a Hi/Lo ss headlight?? just coz i dont really wanna have to buy a new kit if i dont have to. ive tried every possible arrangement between the three pins on the glob plug but havnt got it going yet Any...

As far as oil will go, changing it wont stop it open-diffing. but believe the hipe and throw some royal purple diff oil into it. Or, if the diff shop has some other advice, do what they say

go spool and youll love all driving sensability and the police will love you, especially if you have to do a 20point turn out of a concelaled RBT so you dont go chirping tyres infront of 5 of the fuzzes finest just take it to a diff shop and get them to rebuild it. Every stock LSD from holden...

Ive heard FIT rockers are just reco'ed original items so id rather go for Mace as they're all original

Depends what you want Cruiser - go pedders Wanna throw it into corners - king spring and monroe short shocks Many people dont go with short shocks when using king springs and the rides crap, even with FE2 shocks. But ive just had shock monroes put in, with new strut bearings, strut top...

they attached a device to you hub like they would a wheel, and theres a roller on the end of an arm thats adjustable. They move it back and forth the arch (front to back) and lightly increase pressure each time. If its not that dramatic a problem, most will start by just flattening the liip on...

holden are on the meaner side of 300. They are the same as holden, but as said no ss. Which is better, IMO, for people who dont have an ss but have the ss kit Keep in mind, many people dont seel with the bolts!!

heard the guy from OZauto in smithfield went walkabouts afew months back. Owed alot of people alot of money

if the VY is a series 1 im pretty sure it wouldnt, a series 2 monaro should fit considering all VY series 2 were the base for the VZ. Only thing i can think of is the gaurds were tweek to allow sleek fitment of the vents in the VZ series. Considering its Holden telling you this id believe it...

possible, since the monaro is a complete diff chassie than the normal commodore

people who sold it should know how to install it. Other option would be to contact the company who actualy made the brace. Its not a difficult instal process. Just make sure its even on both sides and straight, mark and drill away. Theres really no technical measurments and such to go on best...

difference between a v6 spring and v8 spring in regard to ride quality are minimal and negligable. wont feel a difference one to the other

Looking to get afew dents removed from my ute. Looking at afew different companies it looks like most large dents with no damaged paintwork can be removed. Was shock to see even large, sharp dents came out looking like new Ive dont a ring around afew places and talk to some people but wanted...

Bought a set of foglights the other day, second hand so they didnt come with any nuts. They fit fine, just dunno what nuts to get. I was told 8mm metric, but the guys exact words were ''i think 8mm metric'' so id like to see if anyones got any other info or knows the size. cheers guys

give the boys who you bought it from a yell. they would (ie should) know how to put it all together. Just make sure you get the right nuts and bolts with high tensile strength

For the front, yes it can be an issue. Sometimes it is sometimes it isnt. The difference is in the weight of the V8 engine and components compaired to the weight of a V6 engine and components. To drop each individual car down the same amount, the springs need to be different springrates or...

Since your in sydney id drop the guys at RYDA car audioa line and see what they have to say. Theyve got pretty much everything and i think you can get an interface adaptor to get the original steering wheel controls to work with the new unit, tho im not 100% sure. I do know pioneer make a...

Anybody put a set of race seats into a commodore, especially VY?? As far as i can tell noone makes an adaptor specificaly made for a VY, but many make universal rails. Has anybody used or modded a universal rail? Or know somewhere that makes seat rails for a vy? Or can suggest a person or...

just remeber its going to fluctuat normally, increase when accelerating etc. After afew long drive youll see how it works. Its common sense (not saying you dont have any common sense) but some people thing it works like a water temp meter, that its suppose to stay in one position etc

it wont stuff your motor. the sensor is only connected to the light on your dash. Nothing changes depending on the oil in your car, its temp, pressure etc. (unlike an o2 sensor in your exhaust adjusting your ignition) basically youll just have to keep an eye on your gauge as there wont be any...