304 sniper kit

[shane_3800]

Measurement is about 65mm from the manifold to the bracket so if i do it that way ill find some decent solid spacers and put a bolt down the gutts of it, thats how its sitting all setup with injectors

If you have a lathe you can drill out some solid stock, I have done this before.

 

[Lex]

Just buy a length of ally tube. Make a jig to cut them all to one size.

Cut the first one & test for correct length. Once the length is known, then make the jig, & cut the rest.

Then you can buy the correct size & length bolts.