Corny4's VH SL/X Soon to be 304and T5 =D

[DANNY8]

Are u using the VN kframe and rack? Otherwise if ur still using the vk kframe and rack the VN headers won't work.

 

[CORNY4]

Yeah mate got the VN K-frame and power steering in her. Also, what part is the intermediate shaft I need off a VL, Im guessing it's the end part with the spline?

 

[DANNY8]

Yeah the bit between the end of the steering column and the rack.

 

[CORNY4]

Haven't been on here in a while. just wondering, With my foot pedals, What throttle/clutch cables do I use? can I use the cables out of the VN? or do they need to be custom?
Also With the wiring looms, All I need out of the VN is the main engine loom, Right? (The loom which runs from the ECU to like the injectors ect) It runs down the left side of the engine bay. But what about the Loom which comes from right hand side and goes to the lights ect and starter motor? Cheers Mike

 

[Pub247]

you should be able to use vn cables no problems. As for wiring your right use the engine loom then you just wire the one connector on the loom near ecu i'd use the vn starter loom if possible some wiring needed there too

 

[CORNY4]

Just bought a VL Disc brake diff (Picking it up on Saturday). Just one question. Will my VN drive shaft bolt up to it? Or do I need to buy a Vl drive shaft? Cheers Mike

Will Do some photo updates ASAP of the VH

 

[VBRED]

You will need the rear half of the VL drive shaft.

 

[CORNY4]

Cheers mate, and I understand it needs to be shortened?

 

[chrisso 82]

Hey mate had a read of your thread nice work so far keep it up ..!!!!!!

ALSO KEEP THE PICS COMING!!!!!!

 

[CORNY4]

Havn't been on here for a while,
But I have finaly got, my Diff, Drive shaft, Intermediate shaft and also picked up some Front and rear ultra lows with shortened shocks. Heres a quick pic of the Diff after a quick lick of paint,

Diffs now in the car and looks good.