carcollector
Active Member
- Joined
- Aug 30, 2007
- Messages
- 211
- Reaction score
- 74
- Points
- 28
- Location
- Adelaide
- Members Ride
- WM Caprice, VZ SS Crewman, ZB Calais V,VE CalaisV
I bought an OBDII diagnostics connector from Ebay - eBay Australia: Buy new & used fashion, electronics & home d
I've loaded the software, and when I plug it in, the software on the PC talks to the scanner OK, but when I plug it into the car, the scanner briefly runs through the comms LEDs (ie all of the Rx and Tx LEDs flash, then go out except for the power LED), and the software reports that the comms fail with the car.
Does anyone have one of these that can assist, or offer any help?
any help or tips would be much appreciated,
I've loaded the software, and when I plug it in, the software on the PC talks to the scanner OK, but when I plug it into the car, the scanner briefly runs through the comms LEDs (ie all of the Rx and Tx LEDs flash, then go out except for the power LED), and the software reports that the comms fail with the car.
Does anyone have one of these that can assist, or offer any help?
any help or tips would be much appreciated,