Holden Statemans

[Zues German]

Hello,

I have a Holden statemans with Abs and Traction control light on.

Used ABS fitted in but light is staying on. Drove vehicle after 20 min light goes off.

Now the warning lampd is on again.
I cannot read faults as my scanner cannot identify or communicate with abs/traction ecu. Anyone had this problem.

Also anyone with wiring workshop manual.

 

[Fu Manchu]

What sort of Statesman? Which model?

 

[Zues German]

Year: 2000

Make: HOLDEN

Model: WH

Colour: RED

Second Colour: GREY

Submodel: STATESMAN V8

Body Style: Saloon

VIN: 6H8WHY19FYL568870

Engine No: VF000101439

CC rating: 5,737cc (5.7l)

Fuel Type: Petrol

 

[Fu Manchu]

Only the higher end scan tools will be able to poke around with ABS module codes.

Until we know what those codes are, there is a heap of lucky guesses to be made.

 

[Fu Manchu]

I’m not sure if WH had to have the module linked to the car. Others might?

 

[Zues German]

Only the higher end scan tools will be able to poke around with ABS module codes.

Until we know what those codes are, there is a heap of lucky guesses to be made.

Yes, you are totally correct.

 

[Zues German]

I’m not sure if WH had to have the module linked to the car. Others might?

So the light stayed on after fitting a secondhand abs pump. Only when driven for 1 hour or so light went off. Once ignition was switch off and started vehicle light is back on, now.

I hope I can get a workshop manual, but it is really difficult to get one.

 

[Fu Manchu]

You will find a factory workshop manual as a download for free. Some quick googling.

 

[Zues German]

You will find a factory workshop manual as a download for free. Some quick googling.

Thank you. Much appreciated it

 

[lout]

have a read of this post
apparently you can flash abs codes

https://forums.justcommodores.com.au/threads/abs-and-trac-switching-off.222117/#post-2498316