CSL
Member
- Joined
- Sep 6, 2005
- Messages
- 498
- Reaction score
- 5
- Points
- 18
- Age
- 37
- Members Ride
- missus (in more ways than one)
hello,
i had to change my IAC vlave cause it would drop down to 500 itermititaly and then somtimes stall, so i got one off a know working throttle body, put it on, (cleaned and fresh) then i reset the comp, but now it contantly idles at 500rpm in gear and about 550-600 in p/n.
i know it would hvae somthing to do with the pintle but i thought these self adjusted. i also adjust the TB stop screw cause the butterfly was sticking but not too much just enough so it doesnt stick. the TB is a v8 item polished out. all the screws and bolts are tight and all hoses are on
anybody?
i had to change my IAC vlave cause it would drop down to 500 itermititaly and then somtimes stall, so i got one off a know working throttle body, put it on, (cleaned and fresh) then i reset the comp, but now it contantly idles at 500rpm in gear and about 550-600 in p/n.
i know it would hvae somthing to do with the pintle but i thought these self adjusted. i also adjust the TB stop screw cause the butterfly was sticking but not too much just enough so it doesnt stick. the TB is a v8 item polished out. all the screws and bolts are tight and all hoses are on
anybody?