King springs for the ve's

[Blind Sniper]

ssv sportwagon .....ssl all round.....standard shocks.... ride is good.... not sure on lowered height, they are 22 inch wheels

 

[Super low ve berlina]

Hey guy's iv got a ve berlina with 22s and sssl all round nice ride very happy with it had to role the gards but dont scrape i used standed shocks all up cost me 500 from shelby tyires and shocks Nsw

 

[aza252]

http://i99.photobucket.com/albums/l...621015523_682645522_21489969_1594309993_n.jpg

What Springs: king springs SSL rear, stock front

Lowered: 65mm thats also with around 100kg of tools right at the back

ride quality: Feels the same to me

Where from: ebay never used

how much: $85 installed myself

Model: VE SSV

thinking about doin the fronts should i put ssl in there aswell?

 

[Gravity]

Mine is sitting 360 front, 350 rear. I'm not sure if that's SSL or something else. Kings.

Anyone know what the stock height is? I'd only wanted an inch lower and I know it's lower than that.

 

[calais06]

What springs: sports rydas rear, kings sssl front

What shocks: std

Ride height after: 345mm rear, 370mm front. - hub to guard

Ride quality: fine, bit bumpy with 20's

Were from: eBay for kings, pedders (at cost)

How much: $300

And model: sedan

Edit: have to wog-roll over medium/large speed humps, slow and sideways over sharp ones like in shopping centers and sharp declines in carparks make life difficult..

Looks awesome though.

 

[kyl3]

Just got Kings "triple springs" put in my SS. which took her down 2.5inches. (~65mm after settling)
Speed bumps are no longer my friend... but corners are.
Prettymuch got rid of any annoying body roll I was getting. kept the shocks standard
and she looks very nice! keen to get some 19's on her. planning 9.5F 10.5R. want a decent amount of tyre still, for nsw's terrible roads.

got one shot of before and two of after.

VE SS Commodore - Imgur

 

[ybhve4]

hi all,

good tread. can i confirm the following before I take the next step:

1. For a levelled look the front should be one level lower then the rear?

2. SSL is the max with stock shocks?

this is for a Calais Sportwagon 6cyl.

cheers

 

[simple wagon]

Hi there, your 6 cylinder will need sssl in front and slhd in rear for it to sit at super low height(ssl) ive just done my wagon to this height and kept the standard shocks/ struts, it sits level and rides very nice. the codes are a little confusing but trust me they are rite. you can download the kings spring catalogue if your unsure, hope this helps.

 

[ybhve4]

Hi there, your 6 cylinder will need sssl in front and slhd in rear for it to sit at super low height(ssl) ive just done my wagon to this height and kept the standard shocks/ struts, it sits level and rides very nice. the codes are a little confusing but trust me they are rite. you can download the kings spring catalogue if your unsure, hope this helps.

awesome...thanks mate

 

[JoshSv6]

What springs: sssl rear sl front

What shocks: Monroe lowered

Ride height after: about 125mm

Ride quality: better

Were from: online from Sydney

How much: $700 self fitted

Model: sv6 ute

Ssl will be going in the front soon and the rear air bagged.
Photo