Just ordered some sandblaster nozzles and a new protective head and face mask. Probably take two weeks to arrive so looks like the headers won't be fitted for 2,1/2 weeks. This week I will clean them up with the wire brush on the grinder best I can and then I can just spend 10-15 mins on the blaster, getting into the nooks and crannies. Would love to have them fitted this weekend but can't have everything. Gonna head home tomorrow after work and see if I have any hi-temp exhaust paint or if I need to buy another can from SCA. Gonna paint them matt black as I don't particularly like the light blue on the Pacies and prefer some less conspicuous. I need to size up the bolts for the flanges as I left the bolts behind at the wreckers. Just means getting something roughly the right size and then going in to the bolts shop and buying the right ones.
On another note since I won't be fitting headers I am going to do some light panel work and tap out this tiny dent I have in the rear quarter near the tail light. Then I plan to cut and polish the paint. I also have a plastic tub corner that needs sandblasting and repainting as someone has painted it in cheap enamel by the looks of it, as it is all cracked up. If I get time I will also lower the rear part of the headlining and reglue it as it has come away from the board and had a small bubble in it.