Kuz
New Member
- Joined
- Sep 17, 2012
- Messages
- 12
- Reaction score
- 0
- Points
- 0
- Location
- Brisbane
- Members Ride
- VE SS-V Sportswagon Redline
Test fitted the 20 x 10" +35 rears.... close but should be fine? Still need to get guards rolled though.
Yeap...
Took out on the driveway.... fronts without spacers. I guess the wheel design/spokes is the impeding factor. Bit of paint off the edge of caliper.
So hoping custom 3mm spacers to suit VE's centre bore, pcd, bolts etc on the fronts will not cause any vibration issues. The VE wheel bolts seem pretty damn long as is, so I should be fine with them since 3mm is bugger all. A lot of thread was left with the new rims on (using open ended wheel lugs).
And hoping a good ol guard roll is all the rears need to accommodate the rear wheels. Maybe some more neg camber?
Either way.... the rims look damn good on the wagon!
Yeap...
Took out on the driveway.... fronts without spacers. I guess the wheel design/spokes is the impeding factor. Bit of paint off the edge of caliper.
So hoping custom 3mm spacers to suit VE's centre bore, pcd, bolts etc on the fronts will not cause any vibration issues. The VE wheel bolts seem pretty damn long as is, so I should be fine with them since 3mm is bugger all. A lot of thread was left with the new rims on (using open ended wheel lugs).
And hoping a good ol guard roll is all the rears need to accommodate the rear wheels. Maybe some more neg camber?
Either way.... the rims look damn good on the wagon!