crazybiker
Member
- Joined
- Sep 9, 2008
- Messages
- 703
- Reaction score
- 3
- Points
- 18
- Location
- Sydney NSW
- Members Ride
- VR Commodore V6
Ok.
Now that we've got the monaro near completion, we're trying to fine tune it back to it's optimum power.
Dad reckons that it's not making much power compared to what it used to. It's also just hitting a complete wall whenever we get to 5500RPM. Dad said it used to rev out to about 7000.
We're not really sure what it is.
The car has an electronic ignition setup too
We've tried adjusting timing around. We've used a base timing of 2ºBTDC, 6ºBTDC and 7ºBTDC. Should we try another problem, or is it something else?
Now that we've got the monaro near completion, we're trying to fine tune it back to it's optimum power.
Dad reckons that it's not making much power compared to what it used to. It's also just hitting a complete wall whenever we get to 5500RPM. Dad said it used to rev out to about 7000.
We're not really sure what it is.
The car has an electronic ignition setup too
We've tried adjusting timing around. We've used a base timing of 2ºBTDC, 6ºBTDC and 7ºBTDC. Should we try another problem, or is it something else?