scv6hilux
New Member
- Joined
- Feb 19, 2013
- Messages
- 3
- Reaction score
- 0
- Points
- 0
- Location
- melbourne
- Members Ride
- 85 hilux supercharged vp v6
Hi everyone i just put a sc14 csr blower on to my vp v6 in my hilux, im having issues with pressurising the sump, i got a new pcv valve but i cant find where it is to replace it i also vented the rocker cover to help but its just spewing oil out and the dip stick geeps popping out even after i vented the rocker cover, im only running 5 psi. the throttle body is still after the blower. im reading mixed reports of the pcv being in the rocker cover its not there,
so any help with, would be great.
1) where is the pcv?
2) are there any other vac lines i need to block/ bypass?
3) how do i plum the catch can?
4) apart from blowby is there any other way the sump is getting the pressure?
5) do i need to plank off the s pipe that goes from the throttle body to the back of the inlet manifold.
thanks Kane
so any help with, would be great.
1) where is the pcv?
2) are there any other vac lines i need to block/ bypass?
3) how do i plum the catch can?
4) apart from blowby is there any other way the sump is getting the pressure?
5) do i need to plank off the s pipe that goes from the throttle body to the back of the inlet manifold.
thanks Kane