Hello hello...!
Nice WB *uwishn* can't wait til the HQ's back on the road!
Bit of an update pjdm1980, been a long time coming, but I've been putting this off for a while!!
Rust repairs on the cab, specifically the inner and outer sills, front floor pans, and apparently the rear quarter panels - gotta love how things snowball...
Outter sill cut off, front lower panel/s removed...
Old v's New...
Floor pan out..
My sister's Fiance`laying some down! Nice helmet eyy
You can see the front section's repaired, and the outer sill already on in the last pic. Forget to get before and after pics, but got these ones from half way through!
Everyone laughed at me me for paying $300 for a 100 year old anvil, but I showed them, making the little rust repair sections in no time at all!
So all in all, we replaced the (passenger) front lower sections - where the front guards bolt to the body, the bottom part of the inner sill, the whole outer sill, front floor pan, and the lower half of the rear quarter panel, had to cut off the whole lower section as it was fairly badly damaged, the crease/body line had around an inch of bog on it...
Got the drivers side all cut out, just need to get some sheet from work to make up the smaller bits.
Ohh, and ignore the transmission hump, around the shifter! lmfao. its going once the drivers side floor pan is welded in!