Rear Brake and Rotor charges

[shane_3800]

Ok, so received the bill today after transfering the $670 into my sons bank account over there.
Happy with the pricing as it was
$6 shims
$111 pad set
$260 rotors
$155 labour
The quote had increased by $140 because of additional $60 GST plus $78 for 2 wiper blades.

Thermo leak, front brakes, suspension rubber next service
Thanks for all the input guys appreciated

I would re-use the shims, but any way it is good to see they do it properly as such.

 

[vc commodore]

Ok, so received the bill today after transfering the $670 into my sons bank account over there.
Happy with the pricing as it was
$6 shims
$111 pad set
$260 rotors
$155 labour
The quote had increased by $140 because of additional $60 GST plus $78 for 2 wiper blades.

Thermo leak, front brakes, suspension rubber next service
Thanks for all the input guys appreciated

The labour increase has me intregued.....

Labour costs are different item to the supply and fitament of parts....

That being mentioned, as long as you're happy, that's all that matters

 

[shane_3800]

The labour increase has me intregued.....

Labour costs are different item to the supply and fitament of parts....

That being mentioned, as long as you're happy, that's all that matters

When i running my business I itemized my quotes just like that. Every place I have worked for has done too.
One place did it a little different so people couldn't find out what parts they were using.

 

[Poundy]

Thanks for posting the itemised account. From seeing it, you can see you treated fairly on price.

 

[Poundy]

Nice to get the elephant out the room but was always happy with the service when over there. Guess it will start getting more costly with age @ 2012 and at a guesstimate of 180,000k.
Sad they are no longer made and the reason my son wants me to keep it. Hope my pockets are deep enough lol!

 

[vc commodore]

When i running my business I itemized my quotes just like that. Every place I have worked for has done too.
One place did it a little different so people couldn't find out what parts they were using.

The OP has an itemised quote and posted accordingly

So this is a pointless post from you....

 

[greenacc]

I would re-use the shims.

Most people would.
And there is a good chance this mechanic did too