bpefi
Tech
- Joined
- Nov 5, 2009
- Messages
- 260
- Reaction score
- 3
- Points
- 0
- Location
- Bundaberg
- Members Ride
- Hilux Ute - Vs Ecotech Engine
That's why the bell mouths will work as it will add to the mass of air in the inlet tube - you could effectively triple the mass into the inlet port this way - the spacer on top would be good also in this case for more room in the plenum chamber. The only way though that I can see them going in is tacking them in place & filling with something or getting fairly long ones & machining them for an interference fit. The manifold will be losing effect with the large openings up the top - (different for S/C but) ...