RoChester
Member
- Joined
- Oct 15, 2021
- Messages
- 68
- Reaction score
- 7
- Points
- 8
- Location
- Adelaide
- Members Ride
- VH Commodore
My 16X8's I can't find the offset, where the 16X7 factory wheels I can....This is why I posted up the measurement from the mount up face to the rear lip of my 16X8's as a reference
Just pulled a wheel off and checked it out, I think I've got it right.My 16X8's I can't find the offset, where the 16X7 factory wheels I can....This is why I posted up the measurement from the mount up face to the rear lip of my 16X8's as a reference
The back space measured from the mounting surface of the rim to the inner rim edge is 5 1/2" and the rim is stamped 38P.
So with a 6" backspace, a bigger offset - say 48P and the diff being shortened about 12mm each side there's going to be plenty of room to go to a 245. Even just the diff shortened and backspace or offset looks like it will work..