B28
New Member
- Joined
- Jun 16, 2019
- Messages
- 1
- Reaction score
- 0
- Points
- 1
- Age
- 39
- Location
- Kyneton
- Members Ride
- VY calais s2
Changed a motor in a supercharged vt v6, and now it wont start. The starter wont crank at all unless we bridge the relay pins. Tried another relay and was still the same. If we bridge the starter and get it to crank, the engine still wont run. It lets out a small backfire while trying to start it sometimes. There is good spark and fuel injectors are fine, also ecu was working fine with the old engine?
Any ideas? ? ?
Any ideas? ? ?