Please note : If you put the bridge wire in, the fuel pump will operate even if the ignition key is off and/or removed.
Here is how to work out what to bridge.
Remove fuel pump relay and on the side you will see a diagram like this picture below....
When the power is applied across 85 and 86, it will close the switch between 30 and 87.
If you look under the realy at the pins, they will be numbered.
So the bridge can go across 30 and 87. Just need to find the corresponding terminals in the relay socket.
Look out for some relays have pin 87a, so dont use this one as it wont be connected.