mess666
New Member
- Joined
- Jul 25, 2005
- Messages
- 51
- Reaction score
- 0
- Points
- 0
- Age
- 41
- Members Ride
- VR 5.0L BT1
Hi guys,
Been having this problem for a while ..
Got a VR 5L that has a slight intermittent hesitation when accelerating from idle.
It idles fine, and has heaps of power through all gears, just the slight hesitation whether stabbing it, or accelerating gently. Once it gets past the hesitation point, there is no problem.
I've change plugs, leads, dizzy cap and rotor, and had the injectors ultrasonically cleaned. The contacts inside the dizzy rotor were absolutely gunked up with crap and worn out really bad, so I thought I was onto something, but still no go.
Anyone got any suggestions?
Likely to be the hall effect sensor, or O2 sensor?
Been having this problem for a while ..
Got a VR 5L that has a slight intermittent hesitation when accelerating from idle.
It idles fine, and has heaps of power through all gears, just the slight hesitation whether stabbing it, or accelerating gently. Once it gets past the hesitation point, there is no problem.
I've change plugs, leads, dizzy cap and rotor, and had the injectors ultrasonically cleaned. The contacts inside the dizzy rotor were absolutely gunked up with crap and worn out really bad, so I thought I was onto something, but still no go.
Anyone got any suggestions?
Likely to be the hall effect sensor, or O2 sensor?