vs auto onto vn ecu is this possible

[Izzey]

Losh that was for the op.

What is actually in the car & parts you already have?

vn ecu doesn't run any transmission functions...to fit 4l60e basically means need converting car to model the transmission came out of needing the ecu/loom + whatever else is different or needs modding.

vn v8 ecu/loom your options are th700,th350/th400 conversion or sell a kidney 4l80e

project truck with hq chassis ,304 fuel injected ,and a 4l60 e from a vr i think .have a vn ecu and harness so it looks like the best option will be to get a vr vs ecu and harness ,motor an trans will be getting rebuilt.

 

[losh1971]

VR uses a different trans to VS depending on the year. There are three variants on the VR in the way of auto transmissions.

 

[Izzey]

vn-vp use a screw on 3 wire speed sensor, vr-vs is a push in 2 wire sensor so totally different pulses to deal with also

good to know .have just started to look into what I need .believe its a 95 model and that's about all I know at the moment ,so any info is invaluable ,will check it out when i get home from work.

 

[Izzey]

good to know .have just started to look into what I need .believe its a 95 model and that's about all I know at the moment ,so any info is invaluable ,will check it out when i get home from work.

can i run a vs ecu and engin harness without a pcm

 

[shane_3800]

can i run a vs ecu and engin harness without a pcm

Yes if you get a VN 808 ECU you can use any manual harness from VN to VS and run a 4l60 manual goverener trans.

 

[shane_3800]

Or even a turbo 400

 

[shane_3800]

Then with the 808 like any VN to VS ECU you can buy a memcal adaptor for a laptop and real time tune it.

 

[Izzey]

was looking to put a 4l60e and 304 together in a project but only have a vn auto ecu and harness

 

[losh1971]

It will be a whole lot easier with a VN or VP trans.

 

[Izzey]

It will be a whole lot easier with a VN or VP trans.

yes but getting way too hard to find at a reasonable price now day