Daves95vs
New Member
- Joined
- Mar 3, 2023
- Messages
- 9
- Reaction score
- 2
- Points
- 3
- Age
- 22
- Location
- Ballarat, Victoria
- Members Ride
- 1995 Vs commodore wagon executive, 3.8 v6 ecotec
Hey guys I haven't done these much before but I replaced my centre bearing and one of my uni joints, Ive lined everything up right and i just can't bolt the tailshaft onto the diff, I tried it when the centre bearing was bolted to the car and it's to tight to bolt to the diff and it's gonna reck my new bearing, Ive got no idea Ive tried to lift the rear wheels and even tried lowering the car to the ground but it's still to high