spechter
New Member
- Joined
- Aug 24, 2019
- Messages
- 12
- Reaction score
- 0
- Points
- 1
- Age
- 54
- Location
- Sydney
- Members Ride
- VT V6 Executive
Try pressing the unlock button on the remote immediately before turning the key to start it.
Red light flashing=immobilizer on.
No joy. I've pushed the remote button so many times now, if it wasn't flat before, it probably is now. Lol.
OK, so the immobilizer is well and truly stuck on then, the only time it's not slow-flashing is for 1-2 seconds between cranking and firing.
I've read a couple of other threads that say to leave ignition On for like, 2 hours, and that should take the immobilizer out of the equation.
Trying that now... Dunno if I should expect to see the red light stop flashing or what... Back in 2 hours I suppose!