VX II immobiliser issue?

[lout]

ok unplug the electrical connector to the abs module
check fuse i am fairly sure it was 31 or 34
sorry you have series II fuse 29 is correct

 

[lout]

the engineering data shows the whole communication network is down
the bcm is the hub for this so a scan tool will not reveal anything

 

[illiards]

so need a tow to an auto electrician it seems?

 

[lout]

have you checked fusible link FS looks like huge fuse under bonnet 60A

 

[lout]

unless you find a smart autoelec you will be wasting your time and money

 

[lout]

do you have a multimeter or test light

 

[illiards]

do you have a multimeter or test light

Thx lout
No, I do not have have a multimeter or test light.
We may be heading into areas where my expertise has been exceeded.

 

[lout]

might be worth buying a cheap multi meter

Low Cost Digital Multimeter (DMM) | Jaycar Electronics

A perfect first meter for the hobbiest! - Compact Size - 19 Range - 3.5 Digit - Transistor Test - Diode Test

www.jaycar.com.au

i can talk you through using it
we have had a few similar cases where autoelec has not been able to fix
up to you,
here are a couple of similar cases

Vt S-pack 2001 Series2 Instrument warning lamps problem

When i start the car there is an error and some of the instument lights light up and then about 5 seconds after it starts to make beepin noises and the rest of the instume nt lights turn on and the engine cooling fans start and will not stop untill i turn car off. Ill be uploading a youtube vid...

forums.justcommodores.com.au

Please HELP!! VX Commodore 2001 Auto V6 All Warning Lights Flashing!!!

Hello People, I really need help with my VX 2001 commodore. I already have spent huge money but can't get it fixed. Basically, I was Driving the other day and the car turned off whilst driving. It happened quite a few times before and then started again but that day it never started and I...

forums.justcommodores.com.au

 

[illiards]

might be worth buying a cheap multi meter

http://[URL]https://www.jaycar.com.au/low-cost-digital-multimeter-dmm/p/QM1500

[/URL]
i can talk you through using it
we have had a few similar cases where autoelec has not been able to fix
up to you,
here are a couple of similar cases

http://[URL]https://forums.justcomm...ies2-instrument-warning-lamps-problem.226806/

[/URL]

http://[URL]https://forums.justcomm...1-auto-v6-all-warning-lights-flashing.242876/

[/URL]

Appreciated mate.
Let me assess

 

[BlackVXGTS]

The message 'Serv error' apparently means 'a fault in the trip computer'

I think that's extremely doubtful (in fact I would go so far as to say that this explanation is rubbish).