Samb664
New Member
Hey guys long time reader first time poster.
I have myself a 2004 vz sv6 with an electrical fault that wont allow the pim to handshake to the ecm thus the car will not crank the starter motor. It throws a u0100 generic code each time and states that there is no connection between the two units. The car had a charger hooked up to it and once started somebody had aparently flicked it over to the higher charging setting (unsure of voltage ) and the car shut down . All dash lights work imobiliser is functioning and the starter motor cranks only when you bridge the relay. I have checked all the connections in the engine bay for shorts and all the fuses are fine . I have also gone and replaced the pim. Ecu . Bcm. And the keyhead with no luck . Any help on this would be awsome i have trolled all threads but cannot find a similar situation to mine .
Thanks in advance
I have myself a 2004 vz sv6 with an electrical fault that wont allow the pim to handshake to the ecm thus the car will not crank the starter motor. It throws a u0100 generic code each time and states that there is no connection between the two units. The car had a charger hooked up to it and once started somebody had aparently flicked it over to the higher charging setting (unsure of voltage ) and the car shut down . All dash lights work imobiliser is functioning and the starter motor cranks only when you bridge the relay. I have checked all the connections in the engine bay for shorts and all the fuses are fine . I have also gone and replaced the pim. Ecu . Bcm. And the keyhead with no luck . Any help on this would be awsome i have trolled all threads but cannot find a similar situation to mine .
Thanks in advance