elljay
New Member
- Joined
- Mar 29, 2006
- Messages
- 150
- Reaction score
- 1
- Points
- 0
- Age
- 40
- Location
- Canberra
- Members Ride
- Slammed VS Berlina
If this is the case, Switch the ignition on and check that there is 4 - 6 volts at the diagnosis connector terminal 9. If 4 - 6 volts is not available, check the wiring between the diagnosis connector, the ECU connector terminal A8 or C11 and the TDM or the BCM for a short to earth on an open circuit.