The complete Vn-Vr Manual Conversion Guide.

[Bz Kn33z]

I know the S1 auto and manual flywheels are both 6bolts, manual flywheel is spread apart further, what i was asking is.... My auto motor the flex plate sh1t its self and i have a S1 manual motor and box, so i was going to use the manual flywheel with the adaptor to bolt upto the auto motor, insted of getting another auto flywheel, the reason i brang it up is because i didnt see it mentioned in the write up.

 

[Haydz]

yeah mate you have no chance of using a manual one on the auto.

you can buy my auto flex plate if you want.

 

[Bz Kn33z]

Yeah wreckers wanted $50 might see if any mates got any, just incase they dont how much u want for it and postage to 3500, or would you swap for a manual 1 lol

 

[scrabet]

is it possible to bolt a vns1 gearbox to a vs ?

 

[Haydz]

Possible.
but easyily done. nope.

different bellhousing.

unless you change the motor too.

 

[Haydz]

Yeah wreckers wanted $50 might see if any mates got any, just incase they dont how much u want for it and postage to 3500, or would you swap for a manual 1 lol

ill swap you for a manual one.

 

[scrabet]

Possible.
but easyily done. nope.

different bellhousing.

unless you change the motor too.

ah spewing. whys it so hard to find a manual conversion for a vs. i did have one that i was about to buy but the guy sold it on me after he said i could have it all for 1200 buck

 

[Haydz]

ah spewing. whys it so hard to find a manual conversion for a vs. i did have one that i was about to buy but the guy sold it on me after he said i could have it all for 1200 buck

its so hard to find for a vs because it uses the getrag box.

and there were not a heap of them made.

where as the vn-vr all use the same box its easier to find parts.

 

[Bz Kn33z]

ill swap you for a manual one.

ok then aslong as the auto flexplat is what i need and its in good nick no cracks or anything, how much would postage be to 3500?

 

[Haydz]

ok then aslong as the auto flexplat is what i need and its in good nick no cracks or anything, how much would postage be to 3500?

yeah its in good nic. ill get a quote on the postage mate. shouldn't be too much. maybe 5-10 dollars as its fair light.
my postcode is 2168 if that helps you