muvro
TUFF 6
- Joined
- Jan 15, 2006
- Messages
- 169
- Reaction score
- 1
- Points
- 0
- Age
- 45
- Members Ride
- VT Calais S1 L67 A4
Man, really interesting project you've got going.
First question, Have you got an isolator for the water/meth injection?
Under vacuum, the inlet manifold will try and suck water in, and you won't be able to control it. Many years ago I was going to install water/meth into the U bend of the blower and was going to use a LPG cut off tap. It's a 12v operated tap. Pretty cheap and will ensure no water goes in when you don't want it to.
Also, where are you measuring the boost from?
Is it from the LIM?
I'll be following this with great interest. Not for replication, but to see the results. keep up the good work!
First question, Have you got an isolator for the water/meth injection?
Under vacuum, the inlet manifold will try and suck water in, and you won't be able to control it. Many years ago I was going to install water/meth into the U bend of the blower and was going to use a LPG cut off tap. It's a 12v operated tap. Pretty cheap and will ensure no water goes in when you don't want it to.
Also, where are you measuring the boost from?
Is it from the LIM?
I'll be following this with great interest. Not for replication, but to see the results. keep up the good work!