Clunk felt when I press the brake pedal...

[lmoengnr]

Like I said earlier you don't worry about swapping bushes in these, you replace the whole arms. The effort required to swap bushes in a VE your better off replacing the whole component. VEs are not like Gen IIs where swapping bushes and joints is easy enough.

I think he's referring to the K frame bushes mentioned in a prior post by @Lex .

 

[losh1971]

I think he's referring to the K frame bushes mentioned in a prior post by @Lex .

OK, I was thinking he was talking about swapping arm bushes that the OP mentioned he was going to do earlier. I didn't realise K frame bushes were a high wear point? Especially since arm bushes don't seem to wear in VE's.

 

[HSV-Paul]

Well floored the car on the highway on way home and she went into limp mode. Didn't see what code, just cleared it.

1 limp mode in what would've been 3 or 4 prior to engine mount change, so I can't help but feel I should do something with the loom still...

 

[losh1971]

Maybe replace the other engine mount and see how it goes.

 

[Lex]

Maybe replace the other engine mount and see how it goes.

And trans mount?

 

[losh1971]

Should be able to see if the trans mount needs replacing with visual inspection.

 

[Lex]

Should be able to see if the trans mount needs replacing with visual inspection.

Pinch bar

 

[HSV-Paul]

Wowzer....

 

[HSV-Paul]

Can get 2 x Kelpro mounts for $155 delivered...

 

[HSV-Paul]