Delcowizzid'a vn gts-t

[delcowizzid]

ok so we have found out why T5's die LOL vb went on the dyno yesterday power figure is in over 280kw/380hp at the wheels @ 5800 or some **** on 14psi printer was out of ink awaiting printouts via email and 600+nm of torque at 4800

 

[Immortality]

Not bad, i think that is somewhere close to what we worked out on the Moroso calculator. Is that with a full exhaust and intake filter or the open system on avgas?

 

[delcowizzid]

dont know if he ran it with dump and no filter ob av or if he fitted the exhaust back on have to find out i was working and he had 20 minutes to get it to the dyno lol

 

[peckzz]

hey delco mate, sorry to hastle you on this post, but just wondering if you can tune EMS computers? cheers. for vs ecotec single turbo, cheers

 

[delcowizzid]

nah best bet would be go back to stock delco ecu :rofl2:

 

[chrrr]

Here we go

 

[delcowizzid]

update time and its pretty big and full of awesome win

so the starlet goes to get its cage this week so we had to get it ready 1 night and 2 guys with a 1mm cutoff wheel later and its ready for its cage and 4 link rearend to be fitted

i didnt get the before shots but here it is on our first workbench after picking it up and cutting out the rear while we could get under it

now offloaded onto the shed floor with shortened BW diff in place.some new 10" wheels and used ET STREETS that ive borrowed for mock up on also more inner gaurds removed

rims and tyres for level blocks LOL

front on the ground body leveled engine and trans is in allready

28" needed some more space out with the trusty 1 mill again

my mate whos shed its in is a chev nutter and had to mock up the 8 trumpet meth setup just so we could see what it would look like with a chev in it

all in all a good couple of days work

 

[delcowizzid]

yesterdays gaurd patching pic all tacked in ready to fully weld when it comes back with its cage in and we can drop the diff out

the old cooler out the GTS in for a looksee

and the rear shot

 

[delcowizzid]

some 4link mounts still undecided if ill use these ones or not i have a 2nd set being cut that are a bit different

 

[delcowizzid]

so excited starlet is back in the loaner shed :thumbup: i thought i was gonna have to go have a sly masty when i seen it

pics