Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

L67 Rebuild URGENT!

Discussion in 'VT - VX Holden Commodore (1997 - 2002)' started by DeathSammich, Dec 6, 2017.

  1. DeathSammich

    DeathSammich Member

    Messages:
    80
    Likes Received:
    1
    Trophy Points:
    8
    Joined:
    Jun 27, 2017
    Location:
    Hobart, Tasmania
    Members Ride:
    VT Berlina S1
    Okay Ive put an l67 in my VT commodore that I bought and went to put the belts on but the pulleys are wrong! The belts don't fit on properly, some pulleys look smaller such as the idlers under the coil packs than what they are on pictures. The main pulley is the idler pulley next to the AC because it rubs directly against the belt when it loops around. What are the sizes of all the pulleys so I can get the right ones? Thanks! The engine is a series 2 out of a VX
     
  2. EYY

    EYY Well-Known Member

    Messages:
    3,640
    Likes Received:
    370
    Trophy Points:
    83
    Joined:
    Mar 6, 2011
    Location:
    Vic
    Members Ride:
    VS Statesman
    Look up the nuline or gates pulley diagrams for the l67. There's a smaller pulley under the coils so that it doesn't interfere with the sc belt.
     
    DeathSammich likes this.
  3. DeathSammich

    DeathSammich Member

    Messages:
    80
    Likes Received:
    1
    Trophy Points:
    8
    Joined:
    Jun 27, 2017
    Location:
    Hobart, Tasmania
    Members Ride:
    VT Berlina S1
    Searched up the gates pully diagram and found what I was looking for. Thanks!
     

Share This Page