LSA heater hoses in Ls3

[Ron Burgundy]

Can anyone confirm if HSV LSA heater hoses woukd fit LS3 SS.

Anyone have any close up pictures of how they are routed ?

I really want to get rid of OEM ones from the top of the engine...

 

[Lex]

I really want to get rid of OEM ones from the top of the engine...

Thought l had read you had already done that? Obviously not.

 

[Ron Burgundy]

Thought l had read you had already done that? Obviously not.

Have not done it yet. Just contemplating best option for now. This seems a good option as no mods would be away and hoses are tucked away from the extractors etc.

 

[07GTS]

u can use the ones u have and just re route them, i went down the side with the chassis rail and back up to the firewall, can then wrap it with heat stuff, i done that with may last setup before i redone the hoses but basically same routing

 

[Ron Burgundy]

Managed to get a photo of one. Pretty elaborate

 

[dassaur]

Strongly recommend my method which is documented somewhere on here! Been going strong 2 years. Looks great with techflex over the top too.

 

[dassaur]

Strongly recommend my method which is documented somewhere on here! Been going strong 2 years. Looks great with techflex over the top too.

 

[Ron Burgundy]

Strongly recommend my method which is documented somewhere on here! Been going strong 2 years. Looks great with techflex over the top too.

I think it's the best way. Holden wants $340 for those LSA hoses. No thanks

 

[vr304]

I thought vk heater hoses were the go to for rerouting in ve/vf commodores?

 

[crew chief]

I thought vk heater hoses were the go to for rerouting in ve/vf commodores?

Yeah that's what comes with a Harrop kit but could be better, I routed mine behind the ABS bracket and put some sleeve around it, the yanks have a nice looking option too. Not sure how it transfers over to right hand drive though.
https://www.maverickmancarbon.com/products/chevy-ss-sedan-heater-hose-relocation-kit