trentest
New Member
- Joined
- Jan 8, 2013
- Messages
- 25
- Reaction score
- 0
- Points
- 0
- Location
- Melbourne
- Members Ride
- VT Executive S2
So i have got myself two type r subs both are dvc 4 ohms, one sub is 600rms the other is 500 rms and im using a mrp-m1000 alpine amp to power them. I have wired the subs to 4 ohms so the subs together shouldnt be seeing more than 500 rms which they should be able to handle double when put together. Anyway the problem is when the volume on headunit is decently loud one of the subs sounds like its clipping/bottoming out :S The gain is just under half way and so is the bass boost. I tried to set the gain by using a 40hz test tone but before it hit distortion it just sounded like one of the subs was clipping.
any guidance on what to do next would be helpful
cheers, Trent
any guidance on what to do next would be helpful
cheers, Trent
Last edited: