Hot-Rod
SuPaFlY -LiV3 Surviv3 Di3
- Joined
- Sep 9, 2005
- Messages
- 332
- Reaction score
- 12
- Points
- 18
- Location
- Oz
- Website
- forums.justcommodores.com.au
- Members Ride
- VX Commodore Series 2
Had exactly same problem with my rockers when i installed them. The pedestals they came with were hitting against the push rods, preventing push rod moving correctly. After some shaving of the metal, all good now. When u get your new pedestals check them against ur orginals to make sure they are cut back around the push rod holes, as the higgher ratio of the push rods means they are at more of an angle into the pedestals. When you install them again make sure the pushrods have clearance around the pedestals and push rod holes.