Search results

Trickyricky - I had the same issue on my VY mechanic tried new actuators etc but still had the issue, 99.99% sure it was the BCM needing diodes/capacitors replaced.

bumping this thread instead of starting another. im currently having the same problem, at first i thought it was the power window motor but still the same problem, have checked the switch and it is working so am i right in assuming it is definitely the BCM? notes: can hear the relay click on...

stock standard by the computer average speed is 55km/h

at the moment mine is saying 10.4L/100km with 50/50 freeway/suburban driving, power button is always on and i dont take off like a granny from traffic lights etc.

BUMP now on ebay link buy it now is at $1200 but the reserve is only $800

Deleted

i punched a hooker because i can

check in the bott in the spare wheel well for water, if it hasnt rained recently got a bucket of water and pour it aorund the rear 1/4 window leave it for five minutes or so then check, or take it to a car wash and put the high pressure spray around the window

you overfilled the tank, and have more then likely let fuel get to the level of the breasther hose which is the small hose you have found, moral of the story: dont fill your tank so much, hot tank with no room for expansion is bad mmmkkaayyyy

ummm, im 99.99% sure that the springs will not fit in you car.

so can you lift the lock up inside the car? to me it sounds like youve deadlocked the doors and it justhasnt released properly

i know there is a guide on flushing the system either on here or SC or both, but quick run down, take bottom radiator hose of and watch your old coolant drain, might be an idea to have a bucket underneath the car so coolant doesnt go everywhere, i think its illegal to letit run down the drain...

not on a VR but a VS and its easy, i did it without drainging the coolant though which would make it a bit less messier. not sure what the heater tap is like on a VR but if its the same as a VS just undo the four clamps, then take the hoses off and lift the heads of them up so coolant doesnt go...

also could be the CAS

has red reflectors in the bumper which means that they dont need reflectors in the lights

yeah heater tap $40 something from holden, make sure you get the right one because i think they changed the design, i had one from a 97 model which didnt work on my 95

umm i think he might have either found the elak, or got rid of the car seeing as the thread is over a year old

what you think is a PS fluid leak could also be a auto trans fluid leak if its an auto, i originally thought my trans leak was from the PS but it was a old hose for the transmission cooler

which gear are yopu in with those revs?

id say you more then likely dont have enough oil in the sump, but seeing as youve posted this on the net i would say youve already checked how much oil is in there, seeing as it would be the obviosu thing to do would it not?

the boot leak could also be coming from the rear 1/4 window, there is a guide on SC but basicly remove rear seat and parcel shelf, then the trim around the window undo the 5 or so screws, whilst somehow holding the window from the outside so it doesnt fall, get some windscreen sealent, make sure...

battery? OP said he heard a click click click sound which is more thenb likely the starter trying to kick over but cant get enough power.

yeah pretty sure you can turn the sont ones off, if not jsut fit an amp that will get rid of the problem

i think you will find that is wrong, unless you are including other associated costs such has panhard rod etc. which IMO should be used with any lowering.

this has already been answered in your other thread, you were given step by step instructions pretty much, if you cant follow them i suggest you take your car to a mechanic and get them to do it

can you get to the lid from underneath somehow? so you can put the force on the underside of the lid and push it off breaking the seal that the silicon has made?

sorry for the late reply but i forgot i replied in this thread you dont have to be disabled to get a disabled parking permit, my brother-in-laws moher has MS, they have a disabled permit because she is unable to walk very far without her frame and even then it is at a slow pace. well you...

stand corrected, so people know it is 5/16th size that you want

yeah i know that but some people arent to familiar with the conversion between cm and inches. i know im not:P and from most of the work ive done a lot of the time hoses and clamps etc. use inches for the size

done, all fixed no leaks that i could see, as i said in the last post thanks everyone for the help and offers. for future reference if anyone does a search for the same thing the hose is 5/16ths(think that was it but ill double check when i go down stairs to clean up)

thanks for the help everyone. its a series one and as far as i can tell it is just straight hose with the screw type clamps. thanks for the offer matt but i may aswell put new ones on so i dont have to do it again anytime soon, and i want/need the car running tomorrow morning:P

need some help with the transmission cooler hoses(the rubber ones) one of the hoses is leaking and the clamp has decided to break on me so im going to need to get the hose off to put a new clamp one so i figure i way aswell replace the hoses aswell while im at it as they seem a bit hard...

incorrect in NSW it is perfectly legal to have them in the window as loong as they are on the passenger side on the lower section of the window, and are clearly visible from outisde the car

for that money i would personally look into a whiteline kit

im after some VY SS rims, preferably in the wollongong area, tyres not essential but some that are just legal would be fine. looking for some for around $1000

you dont like it so you installed them in your own car? that sounds really logical

engine bays are quite hot in case you didnt know:yeah: the movement of fuel from tank to fuel rail, and then from fuel rail to tank for unused fuel creates a fair bit of heat, i know a lot of people that converted from carby to efi, and had the return line hooked up to the surge tank, but the...

MSY 250GB 8M IDE Seagate $116

just had a look and it is a gregorys manual i have, and it does have all the eroor codes and how to test them, dont ask mw why i didnt think to check that first. but the look of it the TPS and ECT sensors are connected, which should have that problem covered. one question though 13 is for the...

got a haynes manual, got the error codes using one of michealw's aldl connectors and efilive v4 so i erased the codes then they came back again,