SSVREDLINE2014
Active Member
- Joined
- May 30, 2015
- Messages
- 291
- Reaction score
- 59
- Points
- 28
- Location
- Illawarra
- Members Ride
- VF SSV Redline
Is there any place in sydney that will sell and install quality headlight HID?
Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.
Since such HID globes are technically illegal, a business would be foolish to supply and install them as that would expose them to liability issues should you get pinged for such upgrades.Is there any place in sydney that will sell and install quality headlight HID?
Since such HID globes are technically illegal, a business would be foolish to supply and install them as that would expose them to liability issues should you get pinged for such upgrades.
But from what i've read here, installing such globes is no more difficult that installing the standard globes (which to be honest sound like a pain) so DIY shouldn't be too difficult And if one can't change a tyre or a globe, i'd question whether they should even be allowed to drive in the first place
Absolutely spot on
I guess higher lumen number is good to keep the driver awake.You can't tell whether it's blinding somebody unless you're the one being blinded.
Even though the pattern thrown onto the road might look 'okay', that doesn't mean that it's not shining in the eyes of oncoming drivers.
If you go ahead, make sure the lights are DOT/ADR approved for road use. There's a good reason most, if not all of them aren't.
Btw 6000k is for wank factor. 4300k is the best for vision in a wide variety of weather and road conditions (greater penetration, less reflection off road signs).
Sorry for the bump but does anyone know where I can get deeper high beam and low beam dust caps?
I have found a few low beam (H7) dust caps but having trouble with the high beam (H9).
Any help would be appreciated.
I ended up finding a second hand set of these 3d printed ones for 40 bucks.What low beam caps did you go with and how did you go with the high beam caps ?