Holden ve sv6 manual conversion

[Nick24810]

Hey im on the verge of buy a complete conversion kit for my 2009 holden ve sv6 ute. The box, loom and computer came out a series 2 will it go into my series 1 and will i have to get anything programed?? Cheers guys

 

[Xplaya]

Series 1 = Alloytec Engine
Series 2 = Sidi Engine

I doubt it would align up right if at all. But cant say I have done the swap or read anywhere about it before

 

[Xplaya]

Here is an idea from doing a an alloytec Auto to Manual Conversion.
So could just imagine what else you might need to do from using 2 different gen parts

http://forums.justcommodores.com.au...ytec-wagon-conversion-manual.html#post2405567

 

[Xageer]

there are some 2009's that are MY10s which came with a SIDI engine even though there are a series I, if its that, then it should line up

 

[Xplaya]

there are some 2009's that are MY10s which came with a SIDI engine even though there are a series I, if its that, then it should line up

Interesting did not know this.

So they have the series 1 bumpers / interior etc but just with the SIDI engine / box?

 

[the_boozer]

Save yourself all the headaches sell your ute and buy a manual if thats what you want it will end up cheaper than converting your current ute.

 

[Xageer]

Interesting did not know this.

So they have the series 1 bumpers / interior etc but just with the SIDI engine / box?

yep, thats exactly how it is.

Used Car Research - Used Car Prices - Compare Cars - RedBook.com.au MY10

Used Car Research - Used Car Prices - Compare Cars - RedBook.com.au MY9.5

MY9.5's had the alloytec still but the 2009 MY10's as well as all the 2010 series I's came with the SIDI but no other series II gear as far as I am aware