Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Swapitifyoucan

New Member
Joined
Aug 30, 2017
Messages
2
Reaction score
0
Points
1
Age
26
Location
Adelaide
Members Ride
Vz sv6 6 speed manual sedan
recently swapped svz front brakes&rotors onto a sedan and after bleeding peddle goes nearly all the way to the floor. They do work but not untill the pedal is just off the fire wall. No brake light illuminated when applyed. Was wondering if master cylinder is the same size or not.
 

Attachments

  • IMG_0993.JPG
    IMG_0993.JPG
    146.5 KB · Views: 150

Surfwagon

Well-Known Member
Joined
Jun 8, 2006
Messages
1,780
Reaction score
48
Points
48
Location
Sydney/NSW
Members Ride
AMG Mercedes C63 Wagon
Did you at any stage allow the brake fluid in your system to drain out of the ABS unit?
If air gets into the ABS then you need to have the ABS mechanically bled of air.
Not sure how they do it But Holden get the ABS running with out actually pushing on the brakes.
 

gtrboyy

Well-Known Member
Joined
Jan 25, 2006
Messages
4,297
Reaction score
2,815
Points
113
Members Ride
vt ss & lc gtr
Agree either still got air in system or not properly bled abs or m/cyl
 

Swapitifyoucan

New Member
Joined
Aug 30, 2017
Messages
2
Reaction score
0
Points
1
Age
26
Location
Adelaide
Members Ride
Vz sv6 6 speed manual sedan
Yeah thinking it may be air in abs. Pedle goes hard just not untill its 40mm or sonoff the floor and does pump up harder
 
Top