davey g-force
I'm a sceptic...
- Joined
- Sep 5, 2005
- Messages
- 3,060
- Reaction score
- 20
- Points
- 38
- Location
- "...the winner is..."
- Members Ride
- 02 RX7 S8 Spirit R 13B TT & 2013 Audi A3 1.8T DSG7
Question for those in the know. Does Meguires Swirl-X have better cutting ability than their ultimate compound? The reason i ask is because i have run out of the ultimate that came with the system (piddley little bottle) and have switched to Swirl-X and the Swirl-X is getting scratches out that the ultimate couldn't.
No, SwirlX has much less cut than UC.
If you're going over the same spots you already did with UC, it could be that UC did most of the work and SwirlX is providing that last little bit extra cut and/or it's covering up some fine scratches.
You're doing the right thing by taking your time. Average correction for me is 4-6 hours, not including the previous or following steps and with a DA. I imagine it would be much longer for someone with a DAPS and not as much experience. Remember, the slower you move (arm speed), the more correction you'll get.