VT OBD2 port

[Lex]

Hey mate thanks for your reply i
Have tried this with no success.

Whats the start relay like? Have you been swapping them around?

 

[cjohns87]

Whats the start relay like? Have you been swapping them around?

Hey mate thanks for your reply yes I have tried swapping the relays with known working ones with no success.

 

[Lex]

Hey mate thanks for your reply yes I have tried swapping the relays with known working ones with no success.

5 pin?

 

[cjohns87]

5 pin?

Sorry mate not sure what you are trying to say? “5 pin”
if your talking about the starter relay the one in mine is a 4 pin.
Cheers.

 

[Grimes]

Just a quick clarification, but is the ECU/BCM original? I didn’t think the paper clip trick worked on VT’s? I’ve always had to connect the ALDL plug to diagnostic software to read the codes on VT/VX.

Just wondering if the issue could be related to some previous conversion work.

 

[Lex]

Sorry mate not sure what you are trying to say? “5 pin”
if your talking about the starter relay the one in mine is a 4 pin.
Cheers.

4 pin is wrong. 5 pin is correct.
I'll post the correct part no. tomorrow.

 

[Lex]

4 pin is wrong. 5 pin is correct.
I'll post the correct part no. tomorrow.

Sorry l'm wrong!
4 pin is correct. Just went & checked.
I've got a bosch pn. 332 019 457

 

[BlackVXGTS]

The attached may help you. Note that it requires use of a Tech2 (or equivalent):