Below iv attached a picture of how my 19x8 enix hornets are sitting on my vt at the front. This is scaring me a little any advice ? There running 245/35/19 tyres
Any advice tips or knowledge would be choice.
I bought on gumtree 16inch wheels from an Omega VE which the seller reassured me would fit my car. So under the impression it would be sweet on my MY10 VE CalaisV I brought them home and tried to fit them on that evening only to stupidly find out...
Hey Team!
There were a few similar threads but nothing of exact nature.
I've currently got ROH 235/45 17's on my VX Commodore, as pictured below. They've just got the boring ROH center caps on them at the moment. I reckon it would look much nicer with the Holden Logo in there. I've been...
Hi this is my first time posting, not sure whether or not this is the right section, anyway;
I currently have an SV6 Ute with the stock 18" wheels pictured below. My question was whether or not i could fit some 19" SSV wheels (see picture) onto the car? Would there be any issues fitting these...
Hey guys,
I was wondering if anyone could give me suggestions on a set of new rims for my car. I have a black 2001 VU S Ute and I want some new rims just to make it look a bit sweeter. It's currently sitting on some 18" rims that the previous owner put on, but I personally don't like them...
DESCRIPTION: VE HSV SUPERSPORT 20 INCH WHEELS.
ITEM: AFTER A SET OF 4 VE HSV SUPERSPORTS.
LOCATION: SYDNEY, PARRAMATTA AREA.
CONDITION: NEW OR USED.
DELIVERY/PICK UP INFORMATION: will travel to pick up. OR ORGANISE POST.
PAYMENT OPTIONS: WILL PAY CASH
CONTACT DETAILS...
Hey guys, just wondering what exactly needs to be done to get the VE 16" stockies on the VX. i hear they need to be machined or something...Also another few questions
- Anyone know anyone in perth that can do this?
- Cost?
- is it safe to do this? the last thing i want is to come off the...
Hey guys new to the commodore scene here an need a bit of help in regards to the options of upgrading the shocks and springs on the VX berlina.
Its dead stock and I'm wanting to run the following setup: Running on 15" stockies all round with a firm yet comfortable ride as low as i can without...
Hey guy's. i have recently bought my brother's ute off of him and would like to keep the wheel's it has.. it has 245/35/R19 all round and does not scrap or hit anything, my question is pretty simple and it is basically.. are these wheels legal or will i get defected?
I think it is 2" from...
I'm Very much due for new rear tyres (general wear, no burnouts) so im just going to do the whole lot at once. But im a total noob when it comes to Tyres.
Car, 2010 Ve SV6 Sidi Ute. Mostly used around town with occasional highway. Ive heard the Falken Fk452's are good but they are...
ITEM DESCRIPTION:
17" BSA RIms to suit Pre-VE Commodore. (Came off a VZ)
Might also suit some BMW models.
Silver in colour with Chrome lip. Centre caps included, Bolts not included.
Wheels are in fully funtional condition besides aesthetic wear. Balanced and ready to be used!
Two tyres are...
So I just picked up a set of 19" Rims on the weekend for a killer price and they are in a little need of refurbishing.
Originally the rims were painted silver it seems & thoughts where polish off some of the black marks on them.
As i continued to polish they turned more black and it turns...
DESCRIPTION: Want to buy
ITEM: PDW HB-R 18*8 Rim
LOCATION: Bendigo, Victoria
CONDITION: New/used, I don't mind.
DELIVERY/PICK UP INFORMATION: Happy to pay for shipping if the price is right, and if around Melbourne area would possibly travel
PAYMENT OPTIONS: Bank Transfer...
DESCRIPTION: Swap/ Wanted to Buy / Trade
ITEM: Some new(ish) 19's or 20's for my VZ. Wheels WITH tyres would be ideal but depending on price I could settle for just Wheels.
Happy to trade my current BSA 17"s + Cash or whatever works.
Just got two new front tyres ($200/tyre) put on them...
Hi, long time forum reader here and a proud owner of a Commodore! :yeah:
I'm in need of help trying to see how much my rims cost.
Ok here are the details...
18" Mangels Rims with 80% tread left all around.
I did a little researching because I've never heard of the brand before and It's...
I have two non genuine 18" VY SS rims that have a couple of flats spots where the tyres mount up (less than 4mm)
Is this acceptable?
My other two rims which are genuine are near on perfect.
Thankyou in advance
Rightio so, I bought a set of ANZ Matrix wheels for my VS Ute. They had been painted black by can and I was told that they were all chrome underneath still - no sanding. Obviously it was a crappy job especially with a can and it started scratching paint off just leaning them on each other.
I...
ITEM: A set of genuine BBOSS Eleanor Rims and Tyres (225/35ZR20 - 93W) to suit VT, VY and possibly VZ.
LOCATION: SA - Eastern Suburbs
CONDITION: Used - all wheels have some gutter rash, it has been partially repaired, one is worse than the others. The actual face of all rims is perfect...
Hey lads,
Recently bought a 2005 VZ S ute and have a few little issues with it.
Leak - If I'm driving around and then return home to park in the garage, there is a leak coming from the center of the engine which leaks for about 30mins and then stops. It is only water and I'm guessing...
Hi guys im getting my car lowered and pulling of the spoiler im just wondering what kind of rims/color would look good with my silver vy, (have to be 20's )
Hey guys any help with this would be good there in about 15mm less gap between guard and tyre on the left wheel compared to the right it's like it's shifted over car drives fine but new wheels and its scrubbing also dose anyone have a photo of factory footwell lighting for a vy/vz I'm interested...
hey all, I was just wondering what I have to do to fit ve 16" cop steelies as I don't quite like the size of the 15's on my vt all I know so far is that I have to machine the center bore what else will I need to do to make them fit?
Ok so question time.
I bought some new 17" rims with tyres second hand last night.
Got them home and compared them to the Two matching ones i already had (was trying to find a full set)
Now my problem is, i know for a fact that the two already have fit. but when i compared the old and new...
Clearing out my spare parts, really just want these gone so make a reasonable offer and come get this stuff out of my way!
ITEM: Stock Vx Tail lights. bit of wear and tear, think one of the clips is missing
LOCATION: 2214 - Bankstown area
CONDITION: Used
PRICE: Make an offer...
Trying to find some good quality and cheap rims for my 2009 SV6 (black).
If any good sites that are trusted or shops in my state(Perth), or shops in other states that ship; please let me know.
Also aslong as i get 18 x 8 rims, will any rims of that size (18 x 8) fit my SV6?
cheers
ITEM: Selling WL Caprice Rims.
LOCATION: Frankston Area, Victoria
CONDITION: Used
PRICE: Make me an offer
DELIVERY/PICK UP INFORMATION: Come and get them
PAYMENT OPTIONS: COD, Direct Deposit, Funds Transfer
CONTACT DETAILS: PM or Text: 0449 591 704
OTHER INFO: Two tyres...
Model - vs ute 98
Colour - White
Engine - 3.8 Ecotec V6 about 220,000kms
Engine Mods - none :(
Wheels - 18 ve ss wheels
Gearbox - 4 speed column shift auto
Brakes - stock
Interior - white dash
Other Mods - ultra lows rear, super lows front, tubliner
Stereo - JVC Head unit, 600w alpine...
ITEM: Four 18 inch wheels with Toyo Proxes4 225/40ZR18 92W tyres + 2 extra tyres + 16 wheel nuts
LOCATION: Victoria, Melbourne
CONDITION: Used
PRICE: $250 negotiable
DELIVERY/PICK UP INFORMATION: Pickup from Coburg 3058
PAYMENT OPTIONS: Cash on pickup
CONTACT DETAILS: PM
OTHER INFO: Four...
hey guys this is my first post so im not sure if im doing it right or not haha
Was just wondering, im thinking of buying some 18" rims for my VS and it just has the standards rims on it atm, I think they are 15"
I just wanted to know if I have to get my speedometer calibrated or will it...
Hey might be a Noob question...
But I have just purchased some VY 18 inch HBD J series wheels and Im planning on installing them tonight on my vy executive. Bolts/lock nuts were included with the purchase but I forgot to put them in the car, grrrrr.
I already have some chrome nuts I was...
my vs berlina has stock alloys and I'm seriously tempted to respray them black. just wondering what your opinions are and how exactly I would go about doing this?
if anyone has done this some pics and or tips would be fantastic =)
ITEM: 19' advanti veinnas
LOCATION: VIC s/e suburbs
CONDITION: Used
PRICE: SWAPS or Make an offer
PAYMENT OPTIONS: CASH
CONTACT DETAILS: 0421 501 444
PICTURES:
I got a set of 19' advanti wheels, they are gun metal grey with a silver rim, two tyres are 80% and the rears...
Hello there
I have a VH and had Vy S-pac rims on it, at the time thats all that i thought would fit on the car. I tried to fit Vx SS wheels but it seems that the tyre would rub on the front struts -_-
Im pretty sure the Vy rims where 16x7 and the Vx SS where 17x8 not 100% but something like...
ITEM: Wheel(s) (I only really need 1) for a VZ HSV Senator (10 spoke). These were also the ones on the VZ Skaife Senator and the LE GTO Coupe.
LOCATION: NSW, Sydney
CONDITION: New or Used
PRICE: Make an offer
DELIVERY/PICK UP INFORMATION: Delivered if possible, or I could pickup or...
Just Bought a 96 vs stato off a mate at work... not bad nik... 300000 on the clock but that neither here nor there... rebuild will be first up... so i thought id post a build thread cause i dont see many of these running around all sexed up and angry...
This is the only pick i have at the...
Hey im looking for some new wheels, i was wondering if anyone has had any experience with replica holden wheels, whether they are good, bad, safe.. etc.. Would like to hear what everyone thinks, thanks.
Hey guys, pretty much what the title ask, Will VE SSV wheels on my VK Calais?? :hmmm: Iv'e been told they should fit fine, but would rather ask people who know there stuff before forking out $800 for a set of wheels haha Thanks Guys.