I recently brought some VY Headlights off ebay and am in the middle of installing them.
The problem is the new ones i am trying to install wont fit the one small particular wiring connection.
Do i just mod it or can i buy a new one to fit?
Thanks
Hi,
This is my first post here so hopefully it is in the right place and sorry it if is not.
I have just purchased a GPS system for my VX Berlina Series II and want to mount it without having the cable just hanging across the dash as it just looks plain ugly. Does anyone know how to wire...
I had my front Polk Audio 100Rms splits installed with a 4x100 rms amp bridged to a 300rms sub , but when connecting the front splits to amp the guy didnt ran the wire whole way from amp to the crossover box but he sliced the old front speaker wire and joined it there and let the old speaker...
Hello people,
Could anyone tell me if my 2004 series 2 vy ute has the wiring I'n it for power windows?
I have ripped the center console
Out and there is a 3 prong plug under the stero and I don't no if this is what I'm looking for.
I'n the fuse panel under the steering wheel has a spot for...
so ive gotta get a roadworthy, changing the boss kit back to stock, except i think im missing a wire?
i got the normal 2 wires from each horn buttong going into the connector, which has 1 purple wire going into the steering wheel, the square crimp one (earth i think) and im sure theres a wire...
ok i have a vn hsv+6 1991 (my project) and the factory alarm is on the frits i was wondering is there a way i could take it out and if so how would i go about doing it or is it built into the computer or something like that
G'day all, first time poster so please be gentle.
I'm installing a set of Lightforce driving lights on a nudge bar on my ute, and have a couple of questions.
1. Do the VE's use positive or negative switching for their headlights?
2. Given the battery is behind the seats in the cab...
Hey guys.
Just wondering if anyone knows how to run new speaker wire from the head unit to the front door speakers as mine keep cutting in and out every tile I open and close my doors.
Any help would e very much appreciated :)
Hi guys, first thread so go easy :D
Aiight, so I am going to wire up my new headunit on the weekend, and I've been looking through the forums for some help.
My JVC headunit has an Orange with White stripe wire which, according to the manual, is for the "car light control switch".
I...
Hi all,
This is my first post in any forum on the internet so bear with me... I have tried to search the forum for information but I can't seem to find anyone with the same issue.
I have purchased a MSD 6AL & Blaster SS coil to replace the stock units. I have wired following the MSD guide...
Hi all,
This is my first time posting here and I hope you can help.
Id been at the shops yesterday, jumped back in the car started her up, took off 5 metres and it stalled. Now it is still not firing. I did a service last week and replaced the plugs, leads, coil, Cap and rotor. so none of...
Gday
Its probabably been covered a million times but im new so forgive me, I just installed some altezza taillights i scored off a mate on my new vx ss but they have caused my traction control light to stay on constantly.
I figure because they are l.e.d. they need some sort of resistor...
Hey guys,
Wondering if anyone can help me, have had my sound system installed just under a year now this includes DVD head unit, 6" front with tweeters, 6" back and two 12" subs running off 1000W mono and 1000W 4 channel, have a problem now when i start up the car the tweeters hum with the...
We have recently purchase a Commodore VR Wagon that the previous owner started to put the cruise control in.
Sadly he did not complete the job (no stop switch etc) so I am completing it.
There is some indication that the current loom supports the cruise control but I need to check.
Its...
Hi Guys and gals
This is my second post and although I dont own a commodore I still have some interesting stuff to offer
I am at present installing a VP v6 into a E2000 dual cab tray that I am going to turn into a Motorhome
and am going through the wiring headaches
I have managed to get...
Gday i hope someone can help me out on this one.
Im getting ready to install Calais headlights into my VY S2 Berlina. I bought 3 sets of HID's to convert driving, highbeam and foglamps all to HID globes.
Now in the headlight itself in the highbeam part theres a red wire and a red with...
Could someone shed some light on my wiring quandary?
I have an SL/E interior light with map lights and trying to hook it up into my SL VH Wagon. I have two wires coming out of the roof, one has 12V + the other seems to be negative - ... The light assembly is missing one terminal from the...
Hey,
Just bought a 10" Fusion Active Encounter 300 WATT Sub&Amp tube for my VT.
I can see what is meant ot go to where, but how do i run the wires? There isn't any DIY steps i have found on here. Just getting the wires from the sub out of the boot would be a blessing!!!!
Thanks
pics...
Hi,
I have been searching around the forums for a couple of hours now, and have found one or two unaswered post regarding the install of a 2nd hand Sports Bar for a VZ Commodore Ute.
Most specifically i am looking for instruction on hooking up the brake light, and if any one has any tips...
Hi folks,
I've had the fuel pump in my VR replaced about 5 months ago, and recently had my tank replaced (as the patch that was on it (there when I got the car) was leaking through a crack, and hemoraging fuel). Friday night, I picked my wife up from work; and the car sat (off) at home for...
Hi, well i own a 1998 VT S1, i have been having trouble starting my car, it cranks but wont start??
Ive replaced my CAS, and a whole new DFI module pack coils+ plate, new leads,new spark plugs. Fuel pump has been tested and is fine altnator os fine also and the starter motor is fine also. Ive...
Hi Guys, nice to meet you all,
ive recently bought a sony headunit. There is two power wires coming from the sony head unit, one red and one yellow, just wondering which wires on the holden loom they connect to?
I foolishly went and cut the holden loom before being told i could just buy an...
Hi Guys
My VZ exec sedan has a 2 pin plug in the boot just under the RHS hinge with a light duty brown/white wire and a heavy duty orange/white wire, I'm looking to wire up a small fridge in the boot and would really like to utilise the wires if they're not used for anything else, the brown...
Hello,
went to the wreckers the other day and scooped a deeper toned car horn to add to my 91 vn.
I am unsure about wether or not i can simply wire it up to the existing car horn in parallel - so i can get a dual tone honk happening :)
The fuse for the horn is 15a so that allows for 180...
Just wondering if anybody knows if the VK 6 Cylinder carby engine wiring is the same as the V8?
If anybody has a pic of the wiring for the 6 cylinder carby model that would be extremely helpful....
Cheers
Someone help me please! Have searched for hours and cannot find a schematic or write up on the plug found in the left of the boot in hsv's... four of the wires go to the factory 8" subs but would love to know what the other 8 or so are and where they end.
Hey ive just put an SS kit on my ute, does anybody know how to wire up the fog lights properly to the dash switch on the facia?
Any help would be awesome tanks
hi on my vy it gets over heated because the engine cooling fan is not working when i turn on the A/C the fan for that works but the other one does not. power is still coming to the fan that is not working because when i turn on the ac the ac fan works and when i turn it off the engine cooling...
hey
I put a vp series 2 engine in my vn series 1 car and 2 cables did not line up... the cable on the loom and the one under the passenger side of car where ecu is. and one just under the fuse boxes.
Does any one know what these cables are and what i can do to fix this problem.
thanks heaps
I have put the mids in the door and mounted the crossovers but cant work out how to do the crossover to the deck. Anyone know how to do this? is there an easy way to do this?
Also i cant work out hot to get the cable through the rubber seal on the chassis so i just have it taped to the side at...
Hi guys, I am at the stage of purchasing a wiring kit for my VZ Berlina. I am looking for a good quality 4 gauge 4 channel wiring kit. I am not necessarily looking for competition wiring, my budget sits between $100.00 and $150.00. I was wondering if anyone could shed some light into which...
Hi All,
Am after the wiring diagram on the Level 1 Cluster, if anyone has it that would be awesome!
If possible the wiring diagram for the BCM aswell, mainly pin outs and what controls what...
Also, does anyone have any specifications on how the needles are controlled? whether its pulse...
In regards to this little item, on my 1988 VL Commodore poverty-pack:
Does anyone have a wiring diagram or can otherwise inform me of the purpose of each one of these wires?
Reason I am asking is the clip appears to have failed and if I am unable to fix it I will be cutting all the...
I want to intall LED strips in either the front door storage areas or the front footwells, I kind of want to do the first as everyone puts them in their footwells. Just wondering though is there a interior light wire on the doors I can tap into, because I dont want to have to run a wire from the...
ok i was thinking of getting a different horn as a second to the one i have but, i do have an old alarm set in the shed and it has a siren with it i know the black is ground and the red is 12v but how do i connect it to a switch with the last wire i think it activates when the last wire...
I am looking to run 12v (cigarette lighter) to my centre console so I can charge my phone in there. What is the best place to tap the power from and the best place to run the wiring.
Cheers
Hey all, I have a VK Berlina 3.3 EFI, and for some F%#ked up reason, my car has no spark.
Yes, i have checked and tested the coil.
Yes, i have checked and tested the Module.
I am running out of ideas.. VK ignitions are pretty simple.. yet still no luck.
Any help, ANYYYTHING will be...